Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS 2008 Caterpillar 980H

2008 Caterpillar 980H For Sale in Ocana, ESP

Name: 2008 Caterpillar 980H
Brand: Caterpillar
Price: 1 USD
Availability: InStock

Auction Pricing

Click here to place a bid

Ritchie Bros. Auctioneers

Ritchie Bros. Auctioneers Dealer Info

Ritchie Bros. Auctioneers Website

Click here to email Ritchie Bros. Auctioneers.

Click for Phone Number

Machine Info:

Serial Number:	CAT0980HAMH081175
Machine Location:	OCANA, ESP

Description:

Enclosed Cab, Air Conditioner, Air Ride Seat, Command Control Steering, 3450 mm Bucket, 29.5R25 Tires, main board is not working, rear gear does not go in** **The closing times of lots 456 to 459 are tied together. If a bid is received, then a time-extension will be applied to all lots. Once the time closes, the highest bidder on each piece will be the winner **

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
Front	Fixed front
Maximum Single-Wheel Rise and Fall	21.7 in ( 55 cm )
Rear	Oscillating +/- 13?
Brakes
Brakes	Meets required standards.
Bucket
Breakout Force	61,425.0 lbs ( 27,862 kg )
Breakout Force - Reference Bucket	61,372.9 lbs ( 27,838 kg )
Bucket Capacities	8.0 yd ( 7 m )
Bucket Capacity - heaped	5.5 cu yd ( 4 cu m )
Bucket Capacity - struck	4.8 cu yd ( 4 cu m )
Bucket Width	11.6 ft ( 4 m )
Dump Clearance at Max Raise	10.9 ft ( 3 m )
Maximum Bucket Capacity	8.0 cu yd ( 6 cu m )
Reference Bucket Capacity	5.5 cu yd ( 4 cu m )
Type - Reference bucket	General purpose with Teeth
Cab
ROPS/FOPS	Meets SAE and ISO standards.
Dimensions
B-Pin Height - Standard	14.8 ft ( 5 m )
Centerline of Rear Axle to Hitch	72.9 in ( 185 cm )
Centerline Rear Axle to Edge of Counterweight	8.2 ft ( 3 m )
Ground Clearance	1.5 ft ( 0 m )
Height - Top of Cab	12.4 ft ( 4 m )
Height - Top of Exhaust	146.3 in ( 372 cm )
Height - Top of Hood	107.0 in ( 272 cm )
Height - Top of ROPS/FOPS	12.4 ft ( 4 m )
Hinge Pin - Max Height	14.8 ft ( 5 m )
Length with Bucket on Ground	31.1 ft ( 9 m )
Reach at Max Lift and Dump	5.1 ft ( 2 m )
Wheel Base	12.2 ft ( 4 m )
Wheelbase	12.2 ft ( 4 m )
Width Over Tires	10.6 ft ( 3 m )
Engine
Bore	5.4 in ( 14 cm )
Displacement	928.0 cu in ( 15,207 cu cm )
Engine Model	Cat C15 ACERT
Gross Power	355.0 hp ( 265 kw )
Gross Power - SAE J1995	393.0 hp ( 293 kw )
Make	Cat
Model	C15
Net Power	318.0 hp ( 237 kw )
Net Power - 80/1269/EEC	353.0 hp ( 263 kw )
Net Power - ISO 9249	349.0 hp ( 260 kw )
Net Power - SAE J1349	349.0 hp ( 260 kw )
Number of Cylinders	6.0
Power Measured @	1,800.0 rpm
Stroke	6.8 in ( 17 cm )
Hydraulic System
Bucket/Work Tool System - Pump Output	123.0 gpm ( 466 lpm )
Dump Time	2.1 seconds
Hydraulic Cycle Time - Dump	2.1 seconds
Hydraulic Cycle Time - Lower, Empty, Float Down	3.4 seconds
Hydraulic Cycle Time - Raise	6.0 seconds
Hydraulic Cycle Time - Total	11.5 seconds
Lower Time	3.4 seconds
Pump Flow Capacity	123.0 gpm ( 466 lpm )
Pump Type	Gear
Raise Time	6.0 seconds
Relief Valve Setting	3,000.0 psi
Operating Specifications
Alternator Supplied Amperage	80.0 amps
Breakout Force	44,775.0 lbs ( 20,310 kg )
Cooling System Fluid Capacity	22.0 gal ( 83 l )
Dump Clearance	10,843.2 ft ( 3,305 m )
Engine Oil Fluid Capacity	10.0 gal ( 38 l )
Front Axle/Diff Fluid Capacity	23.0 gal ( 87 l )
Fuel Capacity	127.0 gal ( 481 l )
Hydraulic System Fluid Capacity	66.0 gal ( 250 l )
Operating Voltage	24.0 volts
Operating Weight	66,489.3 lbs ( 30,159 kg )