Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS Caterpillar 988H

Caterpillar 988H For Sale in Meridian, ID

Name: Caterpillar 988H
Brand: Caterpillar
Price: 150000 USD
Availability: InStock

For Sale: $150,000.00 USD

Apply for Financing

Western States Equipment

Western States Equipment Dealer Info

Western States Equipment Website

Click here to email Western States Equipment.

Contact: Andrew Sailors

Click for Phone Number

Machine Info:

Hours:	17986
Serial Number:	BXY00413
Machine Location:	MERIDIAN, ID
More Information:	https://catused.com/cu/10172820

Description:

****CORE REBUILD MACHINE****, 988H WHEEL LOADER - EPA TIER 3, BUCKET-ROCK 158.5 9.0 CYD, CAB SLIDING WINDOW, COOLER AXLE OIL, COOLING HIGH AMBIENT / 122F, ENGINE STD TIER 3 CERTIFIED, FAST FUEL SYSTEM SHAW AERO, GUARD CRANKCASE, GUARD STEERING CYLINDER, HEATER ENGINE COOLANT 120V, ICTC & LOCK UP CLUTCH, INSTRUCTION NORTH AMERICA ANSI, LIFT ARRANGEMENT 3.88M 2V, LIGHTS STANDARD, LR 83/32 RR 82/32, LUBRICATION ARRANGEMENT, MACHINE ID# U008105, NO SUPPRESSION ARRANGEMENT, OIL CHANGE SYSTEM HIGH SPEED, Online Owner's Manual , Ride Control, ROOF STANDARD, SEGMENTS HD BOLT-ON SET OF 7, STAIRWAY LEFT AND RIGHT, STEERING SECONDARY, TIP HEAVY PENETRATION, TIRES 35/65 R33 XLDD2 * MX L5, TIRES MEASURE:LF 68/32 RF 64/32, WIPER INTERMITTENT REAR

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
Front	Fixed
Maximum Single-Wheel Rise and Fall	22.4 in ( 57 cm )
Rear	Oscillating 13 deg
Bucket
Breakout Force	85,068.0 lbs ( 38,586 kg )
Bucket Capacities	10.0 cu yd ( 8 cu m )
Bucket Capacity - heaped	8.4 cu yd ( 6 cu m )
Bucket Capacity - struck	6.9 cu yd ( 5 cu m )
Bucket Width	12.5 ft ( 4 m )
Maximum Bucket Capacity	10.0 cu yd ( 8 cu m )
Cab
Cab - ROPS/FOPS	Meets SAE and ISO standards
Sound Performance	Meets ANSI SAE and ISO standards
Dimensions
Height - Top of Cab	13.5 ft ( 4 m )
Height - Top of Exhaust	13.5 ft ( 4 m )
Hinge Pin - Max Height	19.2 ft ( 6 m )
Length with Bucket on Ground	40.1 ft ( 12 m )
Reach at Max Lift and Dump	6.7 ft ( 2 m )
Wheel Base Length	15.0 ft ( 5 m )
Wheelbase	14.9 ft ( 5 m )
Width Over Tires	11.8 ft ( 4 m )
Engine
Bore	5.7 in ( 14 cm )
Displacement	1,104.5 cu in ( 18,100 cu cm )
Engine Model	Cat C18 ACERT
Flywheel Power	501.0 hp ( 374 kw )
Gross Power	555.0 hp ( 414 kw )
Gross Power - ISO 3046-2	520.0 hp ( 388 kw )
Make	Cat
Net Power - EEC 80/1269	501.0 hp ( 374 kw )
Net Power - ISO 9249	501.0 hp ( 374 kw )
Number of Cylinders	6.0
Power Measured @	1,800.0 rpm
Stroke	7.2 in ( 18 cm )
Hydraulic Cycle Times
Dump	2.4 seconds
Raise	9.4 seconds
Total Hydraulic Cycle Time	15.6 seconds
Hydraulic System
Dump Time	2.4 seconds
Lower Time	3.8 seconds
Pump Flow Capacity	130.0 gpm ( 492 lpm )
Raise Time	9.4 seconds
Relief Valve Setting	4,500.0 psi
Loader Hydraulic System
Relief Valve Setting	5,075.0 psi
Relief Valve Setting - Low Idle	348.1 psi
Operating Specifications
Alternator Supplied Amperage	100.0 amps
Cooling System Fluid Capacity	27.2 gal ( 103 l )
Engine Oil Fluid Capacity	15.9 gal ( 60 l )
Front Axle/Diff Fluid Capacity	49.0 gal ( 185 l )
Fuel Capacity	188.0 gal ( 712 l )
Hinge Pin Height, Unloaded	16.2 ft ( 5 m )
Hydraulic System Fluid Capacity	70.5 gal ( 267 l )
Operating Voltage	24.0 volts
Rated Payload	27,557.8 lbs ( 12,500 kg )
Rear Axle Oscillation	26.0 deg
Rear Axle/Diff Fluid Capacity	49.0 gal ( 185 l )
Static Tipping Weight	76,776.0 lbs ( 34,825 kg )
Tire Size	35/65
Transmission Fluid Capacity	18.5 gal ( 70 l )
Turning Radius	28.0 ft ( 9 m )
Service Refill Capacities
Cooling System	27.2 gal ( 103 l )
Crankcase	15.9 gal ( 60 l )
Differential - Final Drives - Front	49.0 gal ( 185 l )
Differential - Final Drives - Rear	49.0 gal ( 185 l )
Fuel Tank	188.0 gal ( 712 l )
Hydraulic System - Tank Only	70.5 gal ( 267 l )
Hydraulic System Factory Fill	124.2 gal ( 470 l )
Transmission	18.5 gal ( 70 l )
Steering System
Steering	Meets SAE and ISO standards
Transmission
Converter Drive - Forward 1	4.2 mph ( 7 kph )
Converter Drive - Forward 2	7.3 mph ( 12 kph )
Converter Drive - Forward 3	12.9 mph ( 21 kph )
Converter Drive - Reverse 1	4.7 mph ( 8 kph )
Converter Drive - Reverse 2	8.4 mph ( 14 kph )
Converter Drive - Reverse 3	14.7 mph ( 24 kph )
Direct Drive - Forward 2	7.7 mph ( 12 kph )
Direct Drive - Forward 3	13.6 mph ( 22 kph )
Direct Drive - Forward 4	24.0 mph ( 39 kph )
Direct Drive - Reverse 1	4.9 mph ( 8 kph )
Direct Drive - Reverse 2	8.8 mph ( 14 kph )
Direct Drive - Reverse 3	15.6 mph ( 25 kph )
Max Speed - Forward	24.0 mph ( 39 kph )
Max Speed - Reverse	15.6 mph ( 25 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	3.0
Weights
Operating Weight	128,328.0 lbs ( 58,209 kg )

Dealer Contact Info:

Western States Equipment

Western States Equipment Dealer Info

Western States Equipment Website

Click here to email Western States Equipment.

Contact: Andrew Sailors

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon