List Your Equipment For Free  /  Seller Login

2018 Caterpillar 988K For Sale in Australia, AUS



Auction Pricing



  Click here to place a bid

Machine Info:

Hours:24447
Serial Number:CAT0988KEL8X00224
Machine Location:AUSTRALIA, AUS

Description:

Rear View Camera, Ride Control, Autoshift, Joystick Steering, Loadrite On-Board Scale, Fire Suppression System, E-Stops, Fast Fuel System, 35/65R33 Tires LOCATED-IN-PERTH-WA, - THE CLOSING TIMES OF LOT#'s 300, 301 & 302, ARE TIED TOGETHER. IF A BID IS RECEIVED, THEN A TIME-EXTENSION WILL BE APPLIED TO ALL LOTS. ONCE THE TIME CLOSES, THE HIGH BIDDER ON EACH PIECE WILL BE THE WINNER. Closing Time: 2024-11-27 12:35:00 PM


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
Front Fixed
Rear Trunnion
Brakes
Brakes SAE J1473 OCT90 ISO 3450:1992
Engine
Bore 5.7 in  ( 14 cm )
Displacement 1,105.0 cu in  ( 18,108 cu cm )
Engine Model Cat C18 ACERT
Gross - ISO 14396 580.0 hp  ( 433 kw )
Make Cat
Model C18 ACERT
Net Power 541.0 hp  ( 403 kw )
Net Power - SAE J1349 541.0 hp  ( 403 kw )
Peak Power Speed - 1,500 rpm - Gross - ISO 14396 580.0 hp  ( 433 kw )
Peak Power Speed - 1,500 rpm - Gross - SAE J1995 588.0 hp  ( 438 kw )
Peak Power Speed - 1,500 rpm - Net Power - SAE J1349 541.0 hp  ( 403 kw )
Peak Torque - 1,200 rpm 2,104.0 lbs ft  ( 2,853 nm )
Rated Speed 1,700.0 rpm
Stroke 7.2 in  ( 18 cm )
Torque Rise 58%
General Specifications
?Model 988K
Breakout Force 87,122.0 lbf
Bucket Capacity 6.2.17 cu yd
Bucket Capacity cu. yd. (cu m) 6.5 - 13.5 (5.0 - 10.3)
Category Wheel Loaders
Engine C18
Engine Power hp (kw) 541 (403)
Engine type Cat C18
Full-Turn Tip Load 79,435.0 lbs  ( 36,031 kg )
Full-Turn Tipping Load 79,435.0 lbs  ( 36,031 kg )
Max Dump Height ft. (m) 11.3 (3.4)
Max Dump Height ft.( m) 6.8 (2.1)
Net Power 538.0 hp  ( 401 kw )
Operating Weight 112,574.0 lbs  ( 51,063 kg )
Operating?Weight 112,574 (51,063)
Operating?Weight lbs. (kg) 112,574 (51,063)
Tip Load 63,404 (28,760)
Travel Speed (Fwd/Rev) 24 / 25.4 mph
Travel Speed 24 / 25.4 mph
Hydraulic Cycle Times
Dump 2.2 seconds
Lower Float Down 3.5 seconds
Rack Back 4.5 seconds
Raise 8.0 seconds
Total Hydraulic Cycle Time - Empty Bucket 18.2 seconds
Hydraulic System - Lift/Tilt
Lift/Tilt System Variable displacement piston
Maximum Flow at 1,400-1,860 rpm 153.0 gpm  ( 579 lpm )
Pilot System Variable displacement piston
Hydraulic System - Steering
Steering Cycle Times - High Idle 3.4 seconds
Steering Cycle Times - Low Idle 5.6 seconds
Steering System - Circuit Pilot load sensing
Steering System - Pump Piston variable displacement
Operating Specifications
Cat Truck Match - High Lift 773-775
Cat Truck Match - Standard 770-772