Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $180,000.00 USD
Apply for FinancingMachine Location: | WOODBURN, OR |
Supplied by HeavyEquipmentData.com →
Dimensions | |
Dump Ground Clearance | 2.5 ft ( 1 m ) |
Dump Height | 29.3 ft ( 9 m ) |
Ground Clearance | 2.5 ft ( 1 m ) |
Overall Height | 14.0 ft ( 4 m ) |
Overall Length | 30.5 ft ( 9 m ) |
Overall Width | 14.6 ft ( 4 m ) |
Wheelbase | 14.1 ft ( 4 m ) |
Dump | |
Dump Angle | 60.0 deg |
Load Capacity - heaped | 47.1 cu yd ( 36 cu m ) |
Load Capacity - Struck | 32.7 cu yd ( 25 cu m ) |
Lower Time | 14.0 seconds |
Raise Time | 10.0 seconds |
Rated Payload | 126,287.4 lbs ( 57,283 kg ) |
Engine | |
Aspiration | Turbocharged Aftercooled |
Displacement | 1,150.0 cu in ( 18,845 cu cm ) |
Engine Model | KTTA19-C |
Gross Power | 700.1 hp ( 522 kw ) |
Max Torque | 2,013.6 lbs ft ( 2,730 nm ) |
Net Power | 667.9 hp ( 498 kw ) |
Number of Cylinders | 6.0 |
Power Measured @ | 2,100.0 rpm |
Torque Measured @ | 1,400.0 rpm |
Operating Specifications | |
Alternator Supplied Amperage | 75.0 amps |
Brake/Hoist System Fluid Capacity | 46.0 gal ( 174 l ) |
Cooling System Fluid Capacity | 50.1 gal ( 190 l ) |
Engine Oil Capacity | 16.1 gal ( 61 l ) |
Fuel Capacity | 185.0 gal ( 700 l ) |
Hydraulic System Fluid Capacity | 72.0 gal ( 273 l ) |
Operating Voltage | 24.0 volts |
Steering System Fluid Capacity | 26.0 gal ( 98 l ) |
Tire Size | 24.00-35(36)E3 |
Transmission | |
Max Speed | 35.8 mph ( 58 kph ) |
Number of Gears - Forward | 6.0 |
Number of Gears - Reverse | 2.0 |
Transmission Type | Allison CLT-6063 |
Weights | |
Empty Weight | 85,358.6 lbs ( 38,718 kg ) |
Loaded Weight | 211,643.8 lbs ( 96,000 kg ) |
Weight Distribution Front - empty | 49% |
Weight Distribution Front - loaded | 32% |
Weight Distribution Rear - empty | 51% |
Weight Distribution Rear - loaded | 68% |