Machine description: Unit has 2,231 total hours & 1,068 percussion hours., Set up for T51 drill steel., HD828S drifter, Excellent condition.... more info about the 2021 Furukawa HCR1450ED II.
Machine description: 31 hours on new engine, Approx. 4000 total frame hours & 1,621 percussion hours, HD828S drifter, Currently set up for T51, Excellent condition... more info about the 2019 Furukawa HCR1450ED II.
Machine description: - True low hour 1995 Furukawa HCR9ES, - Unit has been fully serviced., - Throttle cable has been replaced., - ALL but 2 cylinders have been resealed., The only 2 that we did not do, was the inner boom... more info about the 1995 Furukawa HCR9ES.
Machine description: 3.5 - 6.5 Inch Class*, CAT C-13 Tier III Engine*, 3" Drill Pipe*, Estimated 6000 Total Hours with less than 500 hours on out of Frame Rebuild by CAT with warranty, Angle Indicator... more info about the 2011 Furukawa DCR20.
Machine description: DTH Class*, CAT C-13 Tier III Diesel*, Set Up For 4" Drill Pipe*, Joystick Operated Rod Changer Carousel, Water-Injection System, Cyclone Dust Collector... more info about the 2013 Furukawa DCR20.
Machine description: Cummins QSB 6.7, HD 8285 drifter, 3.0" - 5.0" bit range, 72' Maximum drilling depth, Continuously pressurized cab, 37,800 lb. operating weight.... more info about the 2021 Furukawa HCR1450ED II.
Machine description: Cummins QSB 6.7, HD 8285 drifter, 3.0" - 5.0" bit range, 72' Maximum drilling depth, Continuously pressurized cab, 37,800 lb. operating weight.... more info about the 2022 Furukawa HCR1450ED II.
Machine description: Cummins QSB 6.7, HD 8285 drifter, 3.0" - 5.0" bit range, 72' Maximum drilling depth, Continuously pressurized cab, 37,800 lb. operating weight.... more info about the 2022 Furukawa HCR1450ED II.
Machine description: Furukawa HCR9-ES blasthole drillHours: 2,465 on meterVIN: 581033EngineIsuzuCylinders: 6Fuel type: DieselTransmissionHydrostaticFeaturesEngineMast height: 22'Drill bit width: 2.75"Drill bit stemsT... more info about the Furukawa HCR9-ES.