List Your Equipment For Free  /  Seller Login

2020 Hitachi ZW120-6 For Sale in Daphne, AL



For Sale: $98,500.00 USD

Apply for Financing

This machine is available to rent.



Machine Info:

Serial Number:RYUNSA60AH8705246
Machine Location:DAPHNE, AL

Description:

Dealer Rental Machine, Ready to work, Aux Hyd, Quick coupler, CAB AC/HEAT, Stacking Rakes available


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axle and Final Drive
Drive System Four-wheel drive system
Final Drives Heavy-duty planetary mounted inboard
Front Fixed to the front frame
Front & rear axle Semi-floating
Oscillation angle Total 20 degrees (+10 -10)
Rear Trunnion support
Reduction and differential gear Two stage reduction with torque proportional differential
Brakes
Parking Brake Spring applied hydraulically released wet disc type
Service Brakes Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front & rear independent brake circuit HST (Hydro Static Transmission) system provides additional hydraulic braking capacity
Engine
Aftertreatment DOC and SCR system
Air Cleaner Two element dry type with restriction indicator
Aspiration Turbocharger and intercooled
Batteries 2 x 12 V
Bore and Stroke 3.9 in x 4.7 in (98 mm x 120 mm)
Emission Complies with EU stage IV and US EPA Tier 4 Final
Maximum rated power ISO 14396, gross 101 (74 kW) at 2000 min (rpm)
Maximum rated power ISO 9249, net 96 (71 kW) at 2000 min (rpm)
Maximum Torgue 400 NM at 1600 min (rpm)
Model DEUTZ TCD3.6L4F
No. of cylinders 4.0
Piston Displacement 221.0 in  ( 561 cm )
Type 4-cycle water-cooled direct injection
Hydraulic System
Arm Controls Four position valve; Raise hold lower float Bucket controls with automatic bucket return to-dig control
Filters Full-flow 10 micron return filter in reservoir
HST charging pump Gear type 10.4 gal/min (39.2 L/min) at 2000 min (rpm) at 2.5 MPa (25 kgf/cm2)
Hydraulic cycle times - Bucket dump 1.6 seconds
Hydraulic cycle times - Lift arm lower 2.7 seconds
Hydraulic cycle times - Lift arm raise 6.6 seconds
Hydraulic cycle times - Total 10.9 seconds
Hydraulic cylinders - No. x Bore x Stroke Arm: 2 x 4.1 in x 28.0 in (2 x 105 mm x 710 mm) Bucket: 1 x 4.9 in x 17.5 in (1 x 125 mm x 445 mm)
Hydraulic cylinders Type Double acting type
Main pump (Load & steer) Gear type 32.0 gal/min (121 L/min) at 2000 min-1 (rpm) at 20.6 MPa (210 kgf/cm2)
Relief pressure setting 20.6 MPa (210 kgf/cm2)
Transmission charging pump Gear type 5.9 gal/min (22 L/min) at 2000 min (rpm) at 1.8 MPa (18 kgf/cm2
Power Train
Cooling Method Forced circulation type
Transmission Electrical-controlled 1 motor hydrostatic transmission with gear box Gear box: Fixed gear ratio powershift countershaft type
Travel speed Forward/Reverse - 1st 7.1 mph  ( 11 kph )
Travel speed Forward/Reverse - 2nd 34.5 mph  ( 56 kph )
Steering System
Cylinders Double-acting piston type
No. x Bore x Stroke 2 x 2.4 in x 15.6 in (2 x 60 mm x 395 mm)
Steering Angle Each direction 40 degrees; total 80 degrees
Type Articulated frame steering

Dealer Contact Info:

Pittman Tractor Company, Inc.




Contact: Lee Pittman

Click for Phone Number


veritread button





39.96118 \\ -82.99879 \\ Columbus \\ OH \\ 43085