Axle and Final Drive
Drive System	Four-wheel drive system
Final Drives	Heavy-duty planetary mounted inboard
Front	Fixed to the front frame
Front & rear axle	Semi-floating
Oscillation angle	Total 20 degrees (+10 -10)
Rear	Trunnion support
Reduction and differential gear	Two stage reduction with torque proportional differential
Brakes
Parking Brake	Spring applied hydraulically released wet disc type
Service Brakes	Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front & rear independent brake circuit HST (Hydro Static Transmission) system provides additional hydraulic braking capacity
Engine
Aftertreatment	DOC and SCR system
Air Cleaner	Two element dry type with restriction indicator
Aspiration	Turbocharger and intercooled
Batteries	2 x 12 V
Bore and Stroke	3.9 in x 4.7 in (98 mm x 120 mm)
Emission	Complies with EU stage IV and US EPA Tier 4 Final
Maximum rated power ISO 14396, gross	101 (74 kW) at 2000 min (rpm)
Maximum rated power ISO 9249, net	96 (71 kW) at 2000 min (rpm)
Maximum Torgue	400 NM at 1600 min (rpm)
Model	DEUTZ TCD3.6L4F
No. of cylinders	4.0
Piston Displacement	221.0 in ( 561 cm )
Type	4-cycle water-cooled direct injection
Hydraulic System
Arm Controls	Four position valve; Raise hold lower float Bucket controls with automatic bucket return to-dig control
Filters	Full-flow 10 micron return filter in reservoir
HST charging pump	Gear type 10.4 gal/min (39.2 L/min) at 2000 min (rpm) at 2.5 MPa (25 kgf/cm2)
Hydraulic cycle times - Bucket dump	1.6 seconds
Hydraulic cycle times - Lift arm lower	2.7 seconds
Hydraulic cycle times - Lift arm raise	6.6 seconds
Hydraulic cycle times - Total	10.9 seconds
Hydraulic cylinders - No. x Bore x Stroke	Arm: 2 x 4.1 in x 28.0 in (2 x 105 mm x 710 mm) Bucket: 1 x 4.9 in x 17.5 in (1 x 125 mm x 445 mm)
Hydraulic cylinders Type	Double acting type
Main pump (Load & steer)	Gear type 32.0 gal/min (121 L/min) at 2000 min-1 (rpm) at 20.6 MPa (210 kgf/cm2)
Relief pressure setting	20.6 MPa (210 kgf/cm2)
Transmission charging pump	Gear type 5.9 gal/min (22 L/min) at 2000 min (rpm) at 1.8 MPa (18 kgf/cm2
Power Train
Cooling Method	Forced circulation type
Transmission	Electrical-controlled 1 motor hydrostatic transmission with gear box Gear box: Fixed gear ratio powershift countershaft type
Travel speed Forward/Reverse - 1st	7.1 mph ( 11 kph )
Travel speed Forward/Reverse - 2nd	34.5 mph ( 56 kph )
Steering System
Cylinders	Double-acting piston type
No. x Bore x Stroke	2 x 2.4 in x 15.6 in (2 x 60 mm x 395 mm)
Steering Angle	Each direction 40 degrees; total 80 degrees
Type	Articulated frame steering

Dealer Contact Info:

Columbia Western Machinery, Inc.

Columbia Western Machinery, Inc. Dealer Info

Columbia Western Machinery, Inc. Website

Click here to email Columbia Western Machinery, Inc..

Contact: Don Roberts

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon