Equipment ↠ John Deere ↠ Wheel Loaders ↠ THIS 1993 John Deere 544G

1993 John Deere 544G For Sale in South Mills, NC

Name: 1993 John Deere 544G
Brand: John Deere
Price: 24500 USD
Availability: InStock

❮

❯

For Sale: $24,500.00 USD

Apply for Financing

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Machine Info:

Serial Number:	CEG-540388
Stock Number:	CEG-13-8278
Machine Location:	SOUTH MILLS, NC

Description:

Enclosed cab with heat. The Deere, diesel engine starts easily and burns clean exhaust. The transmission shifts smoothly and pulls strong in all gears in both forward and reverse directions. The bucket, loader linkage and center joint are all tight. The brakes are good. The hydraulics are strong and responsive with a single lever control and no leaking cylinders. Some minor rust around the entrance to the cab and on top of the engine cover. Tires are in 50% remaining condition. Inside the cab is clean with all controls functioning properly. Well maintained loader with no known issues.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Bucket
Breakout Force	20,342.0 lbs ( 9,227 kg )
Bucket Capacity - heaped	2.7 cu yd ( 2 cu m )
Bucket Capacity - struck	2.3 cu yd ( 2 cu m )
Dimensions
Dump Clearance at Max Lift	9.0 ft ( 3 m )
Fork Tine Length	4.0 ft ( 1 m )
Ground Clearance	1.3 ft ( 0 m )
Height - Top of Cab	10.5 ft ( 3 m )
Hinge Pin Max Height	12.3 ft ( 4 m )
Hook Height at Max Lift - extended	22.1 ft ( 7 m )
Length w/ Bucket on Ground	23.2 ft ( 7 m )
Length with out Forks on Ground	25.4 ft ( 8 m )
Max Lift Height	11.4 ft ( 3 m )
Reach at Max Height and Dump	3.5 ft ( 1 m )
Wheelbase	9.6 ft ( 3 m )
Width Over Tires	8.0 ft ( 2 m )
Engine
Aspiration	Turbocharged
Displacement	359.0 cu in ( 5,883 cu cm )
Engine Model	6059T
Gross Power	125.0 hp ( 93 kw )
Max Torque	388.0 lbs ft ( 526 nm )
Net Power	120.0 hp ( 89 kw )
Number of Cylinders	6.0
Power Measured @	2,200.0 rpm
Torque Measured @	1,400.0 rpm
Hydraulic System
Dump Time	1.4 seconds
Lower Time	3.2 seconds
Pump Flow Capacity	46.3 gpm ( 175 lpm )
Pump Type	Gear type
Raise Time	5.8 seconds
Relief Valve Setting	2,750.0 psi
Operating Specifications
Alternator Supplied Amperage	95.0 amps
Cooling System Fluid Capacity	6.4 gal ( 24 l )
Engine Oil Capacity	5.1 gal ( 19 l )
Front Diff Fluid Capacity	5.1 gal ( 19 l )
Fuel Capacity	57.6 gal ( 218 l )
Hydraulic System Fluid Capacity	20.1 gal ( 76 l )
Operating Voltage	12.0 volts
Operating Weight	24,092.0 lbs ( 10,928 kg )
Rear Axle Oscillation	22.0 deg
Rear Diff Fluid Capacity	5.1 gal ( 19 l )
Static Tipping Load - Bucket	18,453.0 lbs ( 8,370 kg )
Static Tipping Load - Forks	13,665.0 lbs ( 6,198 kg )
Static Tipping Load - Material Handler	8,945.0 lbs ( 4,057 kg )
Tire Size	17.5-25
Transmission Fluid Capacity	2.6 gal ( 10 l )
Turning Radius	16.3 ft ( 5 m )
Transmission
Max Speed Forward	23.8 mph ( 38 kph )
Max Speed Reverse	16.9 mph ( 27 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	3.0
Transmission Type	Power shift

Dealer Contact Info:

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon