Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
MACHINE SOLD
Hours: | 5676 |
Serial Number: | 51225 |
Machine Location: | PISCATAWAY, NJ |
More Information: | https://catused.com/cu/10138250 |
Supplied by HeavyEquipmentData.com →
Blades | |
Maximum Shoulder Reach Outside of Tires - Left | 79.0 in ( 201 cm ) |
Maximum Shoulder Reach Outside of Tires - Right | 79.0 in ( 201 cm ) |
Moldboard Sideshift - Left | 25.0 in ( 64 cm ) |
Moldboard Sideshift - Right | 25.0 in ( 64 cm ) |
Circle | |
Blade Tip Angle - Front | 40 deg |
Blade Tip Angle - Rear | 5 deg |
Diameter | 60.2 in ( 153 cm ) |
Max Lift Above Ground | 19.1 in ( 49 cm ) |
Max Reach Outside Tires - Left | 78.7 in ( 200 cm ) |
Max Reach Outside Tires - Right | 78.7 in ( 200 cm ) |
Rotation | 360 deg |
Shift Left | 24.5 in ( 62 cm ) |
Shift Right | 24.5 in ( 62 cm ) |
Dimensions | |
Blade Base | 8.2 ft ( 3 m ) |
Height to Top of Isomount Cab | 10.2 ft ( 3 m ) |
Overall Length | 30.9 ft ( 9 m ) |
Tandem Axle Wheelbase | 5.0 ft ( 2 m ) |
Wheelbase | 19.2 ft ( 6 m ) |
Width Over Tires | 8.3 ft ( 3 m ) |
Engine | |
Aspiration | Turbocharged and aftercooled |
Base Power (1st Gear) - Net | 140.0 hp ( 104 kw ) |
Displacement | 359.0 cu in ( 5,883 cu cm ) |
Engine Model | SAA6D102E-2 |
Max Power | 160.0 hp ( 119 kw ) |
Net Power Gear 1-2 | 140.0 hp ( 104 kw ) |
Net Power Gear 4-6 | 160.0 hp ( 119 kw ) |
Net Power Gear 5-6 | 160.0 hp ( 119 kw ) |
Net Power Gears 7-8 | 160.0 hp ( 119 kw ) |
Net Torque Gears 1-2 | 425.0 lbs ft ( 576 nm ) |
Net Torque Gears 3-4 | 538.0 lbs ft ( 729 nm ) |
Net Torque Gears 5-6 | 538.0 lbs ft ( 729 nm ) |
Net Torque Gears 7-8 | 538.0 lbs ft ( 729 nm ) |
Number of Cylinders | 6.0 |
Power Measured @ | 2,000.0 rpm |
Torque Measured @ | 1,500.0 rpm |
Front Axle | |
Ground Clearance | 2.0 ft ( 1 m ) |
Oscillation - Total | 32 deg |
Wheel Lean | 20 deg |
Hydraulic System | |
Pump Flow | 54.0 gpm ( 204 lpm ) |
Pump Type | Closed Center Load Sensing System (CLSS) hydraulics |
Relief Valve Pressure | 3,000.0 psi |
Moldboard | |
Max Depth of Cut | 32.9 in ( 84 cm ) |
Moldboard Height | 26.0 in ( 66 cm ) |
Moldboard Length | 12.0 ft ( 4 m ) |
Moldboard Thickness | 0.9 in ( 2 cm ) |
Moldboard Width | 12.0 ft ( 4 m ) |
Side Shift Left | 32.3 in ( 82 cm ) |
Side Shift Right | 32.3 in ( 82 cm ) |
Operating Specifications | |
Alternator Supplied Amperage | 90 amps |
Circle Gearbox Fluid Capacity | 1.5 gal ( 6 l ) |
Cooling System Fluid Capacity | 11.1 gal ( 42 l ) |
Fuel Capacity | 89.9 gal ( 340 l ) |
Hydraulic System Fluid Capacity | 22.5 gal ( 85 l ) |
Oil System Fluid Capacity | 3.8 gal ( 14 l ) |
Operating Voltage | 24.0 volts |
Operating Weight | 30,950.0 lbs ( 14,039 kg ) |
Std Operation Weight - Front Axle | 8,818.5 lbs ( 4,000 kg ) |
Std Operation Weight - Rear Axle | 22,134.5 lbs ( 10,040 kg ) |
Std Operation Weight - Total | 30,952.9 lbs ( 14,040 kg ) |
Tandem Case Fluid Capacity (each) | 21.9 gal ( 83 l ) |
Tire Size | Low pressure, tubeless, 14.00 X 24, 12 ply rating - G2 |
Transmission Fluid Capacity | 11.9 gal ( 45 l ) |
Steering System | |
Articulation Angle | 23 deg |
Turning Radius | 22.4 ft ( 7 m ) |
Transmission | |
Max Speed - Forward | 26.7 mph ( 43 kph ) |
Max Speed - Reverse | 24.3 mph ( 39 kph ) |
Number of Gears - Forward | 8.0 |
Number of Gears - Reverse | 4.0 |
Transmission Type | Full power shift transmission |