Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
MACHINE SOLD
Stock Number: | 113365 |
Machine Location: | EAST SYRACUSE, NY |
Supplied by HeavyEquipmentData.com →
Bucket | |
Arm length | 10.4 ft ( 3 m ) |
Breakout Force | 53,954.2 lbs ( 24,473 kg ) |
Bucket Capacity - heaped | 7.8 cu yd ( 6 cu m ) |
Bucket Width | 11.3 ft ( 3 m ) |
Digging depth | 4.0 ft ( 1 m ) |
Dump Clearance at Max Raise | 10.8 ft ( 3 m ) |
Dimensions | |
Ground Clearance | 1.2 ft ( 0 m ) |
Height - Top of Cab | 12.3 ft ( 4 m ) |
Hinge Pin - Max Height | 15.3 ft ( 5 m ) |
Length with Bucket on Ground | 32.9 ft ( 10 m ) |
Reach at Max Lift and Dump | 4.8 ft ( 1 m ) |
Wheelbase | 12.1 ft ( 4 m ) |
Electrical System | |
Alternator | 28/180 (V/A) |
Battery | 2 x 180 Ah |
Starter | 24/10.5 (V/HP) |
Voltage | 24 V |
Engine | |
Air cleaner | Dry type filter with main and safety element pre-cleaner service indicator on the Liebherr display |
Aspiration | Water-cooled in-line engine with charge-air cooling exhaust after-treatment through Liebherr-SCR technology |
Bore | 4.8 in ( 12 cm ) |
Displacement | 642.0 cu in ( 10,521 cu cm ) |
Engine Model | D936 A7 |
Fuel injection | Electronic Common Rail high-pressure injection |
Gross Power | 353.0 hp ( 263 kw ) |
Max Torque | 1,450.0 lbs ft ( 1,966 nm ) |
Net Power | 349.0 hp ( 260 kw ) |
Number of Cylinders | 6.0 |
Power Measured @ | 1,800.0 rpm |
Stroke | 6.0 in ( 15 cm ) |
Torque Measured @ | 1,100.0 rpm |
Hydraulic System | |
Dump Time | 3.0 seconds |
Lower Time | 4.0 seconds |
Pump Flow Capacity | 108.0 gpm ( 409 lpm ) |
Pump Type | Load-sensing variable axial piston pump with output and flow control and pressure cut-off in the control block |
Raise Time | 6.5 seconds |
Relief Valve Setting | 4,351.2 psi |
Operating Specifications | |
Cooling System Fluid Capacity | 19.3 gal ( 73 l ) |
Engine Oil Fluid Capacity | 10.6 gal ( 40 l ) |
Front Axle/Diff Fluid Capacity | 15.9 gal ( 60 l ) |
Fuel Capacity | 132.0 gal ( 500 l ) |
Hydraulic Fluid Capacity | 25.1 gal ( 95 l ) |
Hydraulic System Fluid Capacity | 55.5 gal ( 210 l ) |
Operating Weight | 71,870.0 lbs ( 32,600 kg ) |
Rear Axle/Diff Fluid Capacity | 15.9 gal ( 60 l ) |
Static Tipping Weight | 47,620.0 lbs ( 21,600 kg ) |
Tire Size | 29.5R25 L3 |
Turning Radius | 27.5 ft ( 8 m ) |
Transmission | |
Max Speed - Forward | 20.5 mph ( 33 kph ) |
Max Speed - Reverse | 20.5 mph ( 33 kph ) |