Equipment ↠ Volvo ↠ Motor Graders ↠ THIS 2011 Volvo G940

2011 Volvo G940 For Sale in Vernon, British Columbia

Name: 2011 Volvo G940
Brand: Volvo
Availability: InStock

For Sale: Call for Price

Great West Equipment, Inc.

Great West Equipment, Inc. Dealer Info

Great West Equipment, Inc. Website

Click here to email Great West Equipment, Inc..

Click for Phone Number

Machine Info:

Hours:	10323
Stock Number:	EGRA00085 C
Machine Location:	VERNON, BRITISH COLUMBIA

Description:

Description: 14' Mulboard with Sand Prick Boards, FMS Attachments 112 in Front Plow sn ALBG10076, WBM 12 ft Snow Wing SW100 sn 1W20872-3 Overall Machine Condition : Good Front Tries Approx 50%, Rear Tires Approx 80% Please contact us to confirm location and availability **HOURS AND KILOMETER METER READINGS ARE UNVERIFIED. All prices are subject to change without notification. Price is based off Canadian dollar, USD price may be adjusted at time of quoting. ROPSType: Enclosed

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front	45.0 deg
Blade Tip Angle - Rear	6.0 deg
Diameter	64.0 in ( 163 cm )
Max Reach Outside Tires - Left	80.0 in ( 203 cm )
Max Reach Outside Tires - Right	79.0 in ( 201 cm )
Rotation	360.0 deg
Shift Left	30.5 in ( 77 cm )
Shift Right	29.5 in ( 75 cm )
Dimensions
Blade Base	8.7 ft ( 3 m )
Front Ground Clearance	2.0 ft ( 1 m )
Height to Top of Isomount Cab	10.6 ft ( 3 m )
Overall Length	30.0 ft ( 9 m )
Wheelbase	20.5 ft ( 6 m )
Width Over Tires	8.3 ft ( 3 m )
Engine
Aspiration	Turbocharged Aftercooled
Displacement	436.0 cu in ( 7,145 cu cm )
Engine Model	D7E
Max Power	225.0 hp ( 168 kw )
Net Power Gears 7-8	225.0 hp ( 168 kw )
Net Torque Gears 7-8	754.0 lbs ft ( 1,022 nm )
Number of Cylinders	6.0
Power Measured @	1,800.0 rpm
Torque Measured @	1,550.0 rpm
Front Axle
Ground Clearance	2.0 ft ( 1 m )
Oscillation - Total	16.0 deg
Wheel Lean	18.0 deg
Hydraulic System
Pump Flow	55.0 gpm ( 208 lpm )
Pump Type	Axial piston pump
Relief Valve Pressure	3,000.0 psi
Moldboard
Blade Down Pressure	17,895.0 lbs ( 8,117 kg )
Blade Pull at Max Weight	28,260.0 lbs ( 12,819 kg )
Max Depth of Cut	31.0 in ( 79 cm )
Moldboard Height	25.0 in ( 64 cm )
Moldboard Thickness	0.9 in ( 2 cm )
Moldboard Width	12.0 ft ( 4 m )
Side Shift Left	26.5 in ( 67 cm )
Side Shift Right	26.5 in ( 67 cm )
Operating Specifications
Alternator Supplied Amperage	80.0 amps
Cooling System Fluid Capacity	8.2 gal ( 31 l )
Fuel Capacity	107.0 gal ( 405 l )
Hydraulic System Fluid Capacity	24.0 gal ( 91 l )
Max Operation Weight - Front Axle	16,700.0 lbs ( 7,575 kg )
Max Operation Weight - Rear Axle	31,400.0 lbs ( 14,243 kg )
Max Operation Weight - Total	47,000.0 lbs ( 21,319 kg )
Oil System Fluid Capacity	5.7 gal ( 22 l )
Operating Voltage	24.0 volts
Std Operation Weight - Front Axle	10,360.0 lbs ( 4,699 kg )
Std Operation Weight - Rear Axle	25,790.0 lbs ( 11,698 kg )
Std Operation Weight - Total	36,150.0 lbs ( 16,397 kg )
Tandem Case Fluid Capacity (each)	26.4 gal ( 100 l )
Tire Size	14:00 x 24 G-2
Transmission Fluid Capacity	16.0 gal ( 61 l )
Steering System
Turning Radius	23.9 ft ( 7 m )
Transmission
Max Speed - Forward	28.4 mph ( 46 kph )
Max Speed - Reverse	20.0 mph ( 32 kph )
Number of Gears - Forward	8.0
Number of Gears - Reverse	4.0
Transmission Type	HTE840 Fully sequential direct drive Volvo powershift transmission

Dealer Contact Info:

Great West Equipment, Inc.

Great West Equipment, Inc. Dealer Info

Great West Equipment, Inc. Website

Click here to email Great West Equipment, Inc..

Fax: 408-848-0883

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon