Equipment ↠ Volvo ↠ Motor Graders ↠ THIS Volvo G740B

Volvo G740B For Sale in Novi, MI

Name: Volvo G740B
Brand: Volvo
Price: 32508 USD
Availability: InStock

❮

❯

For Sale: $32,508.00 USD

Apply for Financing

Michigan Cat

Michigan Cat Dealer Info

Michigan Cat Website

Click here to email Michigan Cat.

Contact: Nikki Paschall

Click for Phone Number

Machine Info:

Hours:	10266
Serial Number:	035782
Machine Location:	NOVI, MI
More Information:	https://catused.com/cu/10132176

Description:

AS IS, WHERE IS, PLEASE CALL FOR MACHINE LOCATION, VOLVO-CAB, AC, HTR, WHEEL STR, 12' BLD, SCARIFIER, SNOW WING, 17.5R25

Machine Details:

GENERAL CONDITION
ET Download Available	No
Machine Starts and is Operable	Yes
S.O.S. (All Compartments)	No
Tires are Aired Up and Drivable	Yes
GENERAL APPEARANCE
Cleaning Required	Yes
SAFETY ITEMS
ROPS Certification Plate	Yes
Safety Decals In Place	Yes
Safety Decals Legible	Yes
OPERATOR STATION
Safety Decals Legible	3/8 full
ENGINE
Apparent Other Engine Damage	No
Blow By	No
Fuel Leaks	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Compression in Radiator	No
Oil in Anti-Freeze	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	Yes
Ether Aid	No
Signal Lights	Yes
TRANSMISSION
Leaks - TRANSMISSION	No
Transmission - Noisy	No
STEERING
Articulate P & B	Fair
Steering Cylinder	Good
Steering Linkage	Good
Tie Rods / Rod Ends	Good
Wheel Lean Cylinder - STEERING	Good
BRAKE
Control Valve	Good
Lines	Good
DRIVECHAIN / TANDEMS
Wheel Lugs & Rims	Fair
HYDRAULICS
Leaks - HYDRAULICS	No
BLADE
Circle A Frame	Good
Face / Moldboard	Fair
SCARIFER
Lines / Fittings - SCARIFER	Good
Pins & Bushings - SCARIFER	Fair
SNOW WING
Cylinder Condition	Good
TIRES
Leaks - HYDRAULICS	Approximately 81% remaining.
Leaks - HYDRAULICS	Right center tire low on air
Leaks - HYDRAULICS	17.5R25
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Leaks - HYDRAULICS	9’ wide front blade. P&B have some movement. Multiple dentes in molboard, patched in 3 spots with rust holes bent on lower right side. Cylinder leaking slight. Cutting edges shows some wear. Jackstand on left side bent and broken right side missing.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front	44.0 deg
Blade Tip Angle - Rear	6.5 deg
Diameter	66.3 in ( 168 cm )
Max Lift Above Ground	17.2 in ( 44 cm )
Max Reach Outside Tires - Left	79.5 in ( 202 cm )
Max Reach Outside Tires - Right	79.0 in ( 201 cm )
Rotation	360.0 deg
Shift Left	30.5 in ( 77 cm )
Shift Right	29.5 in ( 75 cm )
Dimensions
Blade Base	9.0 ft ( 3 m )
Height to Top of Isomount Cab	10.2 ft ( 3 m )
Overall Length	30.3 ft ( 9 m )
Wheelbase	20.5 ft ( 6 m )
Width Over Tires	8.4 ft ( 3 m )
Engine
Aspiration	Turbocharged
Displacement	586.0 cu in ( 9,603 cu cm )
Engine Model	D10BGAE2
Max Power	243.0 hp ( 181 kw )
Net Power Gears 7-8	243.0 hp ( 181 kw )
Net Torque Gears 7-8	846.0 lbs ft ( 1,147 nm )
Number of Cylinders	6.0
Power Measured @	2,200.0 rpm
Torque Measured @	1,100.0 rpm
Front Axle
Ground Clearance	2.1 ft ( 1 m )
Oscillation - Total	16.0 deg
Wheel Lean	18.0 deg
Hydraulic System
Pump Flow	75.1 gpm ( 284 lpm )
Pump Type	load sensing hydraulic
Relief Valve Pressure	2,700.0 psi
Moldboard
Blade Down Pressure	19,711.0 lbs ( 8,941 kg )
Blade Pull at Max Weight	22,089.0 lbs ( 10,019 kg )
Max Depth of Cut	32.0 in ( 81 cm )
Moldboard Height	29.0 in ( 74 cm )
Moldboard Thickness	1.0 in ( 3 cm )
Moldboard Width	12.0 ft ( 4 m )
Side Shift Left	26.5 in ( 67 cm )
Side Shift Right	26.5 in ( 67 cm )
Operating Specifications
Alternator Supplied Amperage	75.0 amps
Cooling System Fluid Capacity	13.3 gal ( 50 l )
Fuel Capacity	120.0 gal ( 454 l )
Hydraulic System Fluid Capacity	35.4 gal ( 134 l )
Operating Voltage	24.0 volts
Rear Diff/Final Drive Fluid Capacity	6.1 gal ( 23 l )
Std Operation Weight - Front Axle	11,137.8 lbs ( 5,052 kg )
Std Operation Weight - Rear Axle	25,988.1 lbs ( 11,788 kg )
Std Operation Weight - Total	37,125.9 lbs ( 16,840 kg )
Tandem Case Fluid Capacity (each)	26.5 gal ( 100 l )
Tire Size	14.00 x 24 G-2
Transmission Fluid Capacity	10.1 gal ( 38 l )
Steering System
Articulation Angle	22.0 deg
Transmission
Max Speed - Forward	27.2 mph ( 44 kph )
Max Speed - Reverse	19.5 mph ( 31 kph )
Number of Gears - Forward	8.0
Number of Gears - Reverse	4.0
Transmission Type	Powershift

Dealer Contact Info:

Michigan Cat

Michigan Cat Dealer Info

Michigan Cat Website

Click here to email Michigan Cat.

Contact: Nikki Paschall

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon