Hyster H210HD2 Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H210HD2 ➔

Brakes

Parking brake	Spring applied, dry disc on drive axle
Service brake	Oil immersed (wet) disc

Dimensions

Front Tread Range	73 in (184 cm)
Gradeability	49%
Ground Clearance	10 in (25 cm)
Height to Top of Overhead Guard	10 ft (3 m)
Length to Fork Face	14 ft (4 m)
Overall Height - mast lowered	11 ft (3 m)
Overall Width	8 ft (2 m)
Rear Tread Range	76 in (193 cm)
Turning Radius	13 ft (4 m)
Wheelbase	9 ft (3 m)

Engine

Displacement	272 cu in (4,457 cu cm)
Engine Make	Cummins
Engine Model	QSB 4.5
Fuel Type	Diesel
Number of Cylinders	4
Power	160 hp (119 kw)
Power Measured @	2300 rpm
Torque	460 lbs ft (624 nm)
Torque Measured @	1500 rpm

MAST

Lift Speed	89 ft/min (27 m/min)
Load Capacity	21,001 lbs (9,526 kg)
Load Center	24 in (61 cm)
Lower Speed	98 ft/min (30 m/min)
Mast Tip Forward	15 degrees
Mast Tip Rear	12 degrees

Operating Specifications

Alternator Supplied Amperage	120 amps
Axle load - front	46,325 lbs (21,013 kg)
Axle load - rear	4,043 lbs (1,834 kg)
DEF tank capacity	5 gal (19 l)
Drawbar Pull	21,500 lbs (9,752 kg)
Front Tire Size	10.00-20 16PR
Fuel Capacity	28 gal (104 l)
Hydraulic System Fluid Capacity	36 gal (135 l)
Number of Front Wheels	4
Number of Rear Wheels	2
Oil System Fluid Capacity	27 gal (100 l)
Operating Voltage	24 volts
Operating Weight	29,368 lbs (13,321 kg)
Rear Tire Size	10.00-20 16PR
Tire Type	Pneumatic

Transmission

Drive system	Powershift Transmission
Number of Forward / Reverse Speeds	3-3
Transmission Type	ZF WG161

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon