Nissan CFU50 Forklift

Category: Forklifts ➔
Manufacturer: Nissan ➔
Model: CFU50 ➔

Brakes

Parking brake	Hand
Service brake	Drum and Shoe

Dimensions

Angle of departure	30 degrees
Approach Angle	26 degrees
Counterweight Clearance	4 ft (1 m)
Fork Length	42 in (107 cm)
Fork Thickness	2 in (4 cm)
Fork width	4 in (10 cm)
Gradeability	16%
Ground Clearance	3 in (8 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	8 ft (2 m)
Max Fork Height	11 ft (3 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Overhang Front	1 ft (0 m)
Overhang Rear	2 ft (1 m)
Right Angle Stack	8 ft (2 m)
Turning Radius	7 ft (2 m)
Wheelbase	5 ft (1 m)

Engine

Displacement	152 cu in (2,488 cu cm)
Engine Make	Nissan
Engine Model	K25
Model Name	CFU50
Power	63 hp (47 kw)
Power Measured @	2700 rpm
Torque	139 lbs ft (188 nm)
Torque Measured @	1600 rpm

MAST

Lift Speed	118 ft/min (36 m/min)
Load Capacity	5,000 lbs (2,268 kg)
Load Center	24 in (61 cm)
Lower Speed	99 ft/min (30 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	10 degrees

Operating Specifications

Drawbar Pull	4,189 lbs (1,900 kg)
Max Speed	11 mph (17 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	7,940 lbs (3,602 kg)
Tire Type	Cushion

Transmission

Number of Forward / Reverse Speeds	1-1
Steering	Full Hydraulic
Transmission Type	Automatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon