All Equipment Category Specs ↠ Skid Steer Loaders ↠ Mustang 2076

Mustang 2076 Skid Steer Loader

Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: Mustang (See all Mustang Equipment for sale)
Model: 2076 (See all Mustang 2076 for sale)

Dimensions

Clearance at Max Lift and Dump	10 ft (3 m)
Ground Clearance	8 in (20 cm)
Height - Top of Cab	7 ft (2 m)
Length w/o Bucket	8 ft (2 m)
Length with Bucket	11 ft (3 m)
Reach at Max Lift and Dump	95 in (241 cm)
Turning Radius from Center - machine rear	63 in (159 cm)
Wheelbase	4 ft (1 m)
Width Over Tires	5 ft (2 m)

Engine

Aspiration	Turbocharged
Displacement	202 cu in (3,310 cu cm)
Engine Model	4TNV98T / Tier III
Gross Power	84 hp (63 kw)
Number of Cylinders	4
Power Measured @	2500 rpm

Hydraulic System

Pump Flow Capacity	22 gpm (81 lpm)
Relief Valve Pressure	3000 psi

Loader

Breakout Force	6692 psi
Bucket Capacity	1 cu yd (0 cu m)
Operating Load Rating	2,500 lbs (1,134 kg)
Operating Width	69 in (175 cm)
Tipping Angle	4400 degrees

Operating Specifications

Alternator Supplied Amperage	950 amps
Fuel Capacity	19 gal (72 l)
Hydraulic System Fluid Capacity	16 gal (61 l)
Max Speed	11 mph (18 kph)
Operating Voltage	12 volts
Operational Weight	7,480 lbs (3,393 kg)

See all of the Mustang 2076s we have listed for sale.

A Mustang 2076 From Ziegler CAT for $28,400.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon