- Category: Tractors ➔
- Manufacturer: John Deere ➔
- Model: 2038R ➔
Introducing the John Deere 2038R tractor, a reliable and efficient machine designed for a variety of agricultural tasks. With a powerful engine manufactured by Yanmar, this tractor boasts a Gross Power of 36.8 hp and a maximum operating pressure of 2500 psi in its Hydraulic System. Equipped with a Direct Injection system and Final Tier 4 Emissions compliance, the 2038R is built for optimum performance while meeting environmental standards. From its compact design with a flat operator platform to its 3-Point Hitch Category 1 and 615 kg lift capacity, this tractor is ready to tackle any job with ease.
3-Point Hitch
Category | Category 1 |
Lift capacity (24-in. behind link arms) | 615 kg (1,356 lbs) |
Dimensions
Shipping weight | 1,105 kg (2,436 lbs) |
Turning radius with brakes | 3 m (9 ft) |
Turning radius without brakes | 10 ft (3 m) |
Wheelbase | 68 ft (21 m) |
Electrical System
Alternator (12-V) | 85 amp |
Battery size | 500 CCA |
Starter size | 2 hp (1 kw) |
Engine
Air cleaner | Dual element |
Aspiration | Turbocharged |
Bore | 3 in (9 cm) |
Compression ratio | 19.1:1 |
Cooling system | Water pump |
Cylinder liners | Cast-In-Block |
Displacement | 96 cu in (1,568 cu cm) |
Emissions compliance | Final Tier 4 |
Engine Manufacturer | Yanmar |
Engine Model | 3TNV88C-NJT |
Engine torque at rated speed | 101.4 Nm |
Engine Type | Direct Injection |
Family | GYDXL1.57TDA |
Fuel tank capacity | 9 gal (32 l) |
Gross Power | 37 hp (27 kw) |
Injection pump type | Direct Injection |
Lubrication | Pressurized |
Number of Cylinders | 3 |
Power take-off (PTO) power | 30 hp (23 kw) |
Rated engine speed | 2500 rpm |
Stroke | 4 in (9 cm) |
Final Drive
Differential lock | Yes |
Final Drive Type | Spur Gear |
Fluid Capacities
Crankcase with filter | 4.5 L |
Fuel System
Fuel System Type | Direct Injection |
Hydraulic System
Draft control sensing | Position control |
Hydraulic Type | Open Center |
Maximum operating pressure | 2500 psi |
Pump rated output | Steering - 15 L/min, Implement - 20.2 L/min |
Pump Type | Gear |
Remote control valves available | Up to three |
Operator Station
Gear shift location - console/floor | Left Hand Side |
Platform - flat/straddle | Flat |
Rollover protective structure | Foldable, ASABE S478 |
Power Take-Off (PTO)
Brake (for mid and rear PTO) | Wet disc |
Clutch | Independent |
Control | Independent |
Standard | Rear - 540 rpm, Mid - 2000 rpm |
Tires
Front Tires Size | R1 Ag 7.00-12, R3 Turf 23x8.50-14, R4 Industrial 23x8.50-14, R3 Turf Radial 200/60 R15 |
Rear Tires Size | R1 Ag 12.4-16 R3 Turf 14-17.5, R4 Industrial 14-17.5, R3 Turf Radial 300/70 R20 |
Transmission
Axle capacity | Front - 880 kg, Rear - 1089 kg |
Brakes | Wet disc |
Creeper | No |
Cruise control | Standard |
Differential lock | Yes |
Final Drive Type | Bull Gear |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Steering | Power steering |