John Deere 9100 Tractor

Category: Tractors ➔
Manufacturer: John Deere ➔
Model: 9100 ➔

Dimensions

Front Axle Clearance	120 in (305 cm)
Ground Clearance	29 in (73 cm)
Height - Top of Cab	12 ft (4 m)
Overall Length	274 in (695 cm)
Rear axle clearance	10 ft (3 m)
Shipping weight	28,380 lbs (12,873 kg)
Wheelbase	12 ft (4 m)

Engine

Aspiration	Turbocharged
Bore	5 in (12 cm)
Displacement	494 cu in (8,100 cu cm)
Engine Make	John Deere
Gross Power	260 hp (194 kw)
Number of Cylinders	6
Power Measured @	2100 rpm
PTO Power	214 hp (160 kw)
Stroke	5 in (13 cm)

Hydraulic System

Hydraulic System Type	Closed-center pressure compensated
Number of Remote Control Valves	3 to 5
Pump Flow Capacity	26 gpm (98 lpm)
Relief Valve Pressure	2900 psi

Operating Specifications

3 Point Hitch Lift Capacity @ 24 inches	13,871 lbs (6,292 kg)
3 Point Hitch Type	3
Alternator Supplied Amperage	140 amps
Cooling System Fluid Capacity	14 gal (53 l)
Engine Oil Capacity	8 gal (31 l)
Front Tire Size	20.8R38
Fuel Capacity	270 gal (1,022 l)
Hydraulic System Fluid Capacity	26 gal (98 l)
Operating Voltage	12 volts
Operating Weight	28,380 lbs (12,873 kg)
Rear Tire Size	20.8R38

Transmission

Max Speed - Forward	18 mph (29 kph)
Max Speed - Reverse	6 mph (9 kph)
Number of Forward Gears	12
Number of Reverse Gears	3
Transmission Type	Partially synchronized

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon