Categories ↠ Aerial Lifts ↠ JCB S2032E

JCB S2032E Aerial Lift

Category: Aerial Lifts ➔
Manufacturer: JCB ➔
Model: S2032E ➔

See all JCB S2032Es for sale

General Specifications

Brakes

Brakes Type	2 rear-wheel
Drive and steer model	2 front-wheel
Gradeability	25

Dimensions

Ground Clearance	4 in (10 cm)
Solid tyre dimensions	305 x 115 mm (12 x 4.5)in
Turning Radius - Outside	6 ft (2 m)
Weight	4,043 lbs (1,834 kg)

Electrical System

Battery	6V x 4 (225)
Input voltage of Charger	100-24 VAc
Output voltage of Charger	25 A
Power unit	5 hp (3 kw)

Engine

Engine Model

S2032E

Hydraulic System

Hydraulic Oil capacity(Power angle tilt dozer)	4 gal (14 l)
Hydraulic system tank	5 gal (18 l)
system pressure	3481 psi

Performance

Load capacity

1,852 lbs (840 kg)

Platform

Drive Speed - Platform Elevated	1 mph (1 kph)
Drive Speed - Platform Lowered	2 mph (3 kph)
Extension outreach	3 ft (1 m)
Max allowable side force (indoor)	90 lbs ft (122 nm)
Max allowable slope (side/side)	1.5 degrees
Max allowable wind speed (outdoor)	28 mph (45 kph)
Max Platform Height	21 ft (6 m)
Max Working Height	27 ft (8 m)
Max. allowable side force (outdoor)	45 lbs ft (61 nm)
Max. allowable slope (front/back)	3 degrees
Overall height (stowed, guardrail unfolded)	7 ft (2 m)
Overall length (stowed , guardrail folded)	8 ft (2 m)
Overall width (stowed)	3 ft (1 m)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon