Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Case 580 Super N backhoe loader is a versatile and powerful machine designed to tackle a wide range of construction tasks. With a backhoe dig depth of up to 18 feet and a maximum loader lift capacity of 8425 lbs, this machine offers impressive performance capabilities. Equipped with a turbocharged engine producing 97 hp, the Case 580 Super N provides the power and efficiency needed to get the job done. From its hydraulic system pump capacity of 40 gpm to its operating weight of up to 19985 lbs, this backhoe loader is a reliable and efficient workhorse for any construction site. Explore the detailed specifications of the Case 580 Super N backhoe loader below.
Backhoe Loading Height ft. (m) | 12.1 (3.7) Starting 2023 Model Year |
Loader Breakout Force lbs. (kg) | 10,947 (4,965) Starting 2024 Model Year |
Loader Lift Capacity lbs. (kg) | 7,044 (3,195) Starting 2024 Model Year |
Loader SAE hp (kW) | 95 (71) Starting 2019 Model Year |
Max Digging Depth ft. (m) | 14.6 (4.4) Starting 2023 Model Year |
Operating Weight lbs. (kg) | 17269 (7,833) Starting 2017 Model Year |
Travel Speed 4th Gear Fwd mph (kmh) | 24 (38.8) Starting 2023 Model Year |
Dig Depth | 15 ft (4 m) |
Dig Depth - Extended | 18 ft (5 m) |
Load Height - Extended | 14 ft (4 m) |
Loading Height | 12 ft (4 m) |
Reach at Load Height - Extended | 7 ft (2 m) |
Reach From Swivel | 18 ft (6 m) |
Reach From Swivel - Extended | 22 ft (7 m) |
Service brake | Wet Disc |
Cooling system | 5 gal (18 l) |
Engine oil with filter | 2 gal (8 l) |
Front axle | 525 cu in (8,602 cu cm) |
Fuel Tank | 35 gal (132 l) |
Rear Axle | 5 gal (19 l) |
Ground Clearance | 1 ft (0 m) |
Height to Top of Suspended Cab | 9 ft (3 m) |
Transport Length | 23 ft (7 m) |
Transport Width | 9 ft (3 m) |
Wheelbase | 7 ft (2 m) |
Aspiration | Turbocharged |
Bore | 4 in (10 cm) |
Displacement | 208 cu in (3,400 cu cm) |
Emissions Certification | Tier 4 Final |
Engine Model | FPT F5BFL413B |
Gross Power | 97 hp (72 kw) |
Net Max Torque | 328 lbs ft (445 nm) |
Net Power | 95 hp (71 kw) |
Net Torque Rise | 0.45 |
Number of Cylinders | 4 |
Power Measured @ | 2200 rpm |
Stroke | 4 in (11 cm) |
Torque Measured @ | 1400 rpm |
Pump Flow Capacity | 40 gpm (151 lpm) |
Pump Type | Variable Displacement Axial Piston |
Relief Valve Pressure | 3450 psi |
Breakout Force | 10,873 lbs (4,932 kg) |
Bucket Breakout Force | 11,450 lbs (5,194 kg) |
Bucket Breakout Force | 9,833 lbs (4,460 kg) |
Bucket Capacity | 1 cu yd (1 cu m) |
Bucket Width | 82 in (208 cm) |
Clearance at Max Dump Height | 9 ft (3 m) |
Dig Depth | 6 in (16 cm) |
Lift Capacity | 8,425 lbs (3,822 kg) |
Reach at Max Dump Height | 3 ft (1 m) |
SAE - Net | 95 hp (71 kw) |
Alternator Supplied Amperage | 120 amps |
Backhoe Flow- gallons | 41 gpm (156 lpm) |
Cooling System Fluid Capacity | 5 gal (18 l) |
Front Axle Fluid Capacity | 2 gal (8 l) |
Fuel Capacity | 42 gal (159 l) |
Hydraulic System Fluid Capacity | 32 gal (119 l) |
Oil System Fluid Capacity | 4 gal (14 l) |
Operating Voltage | 12 volts |
Operating Weight 2wd | 16,239 lbs (7,366 kg) |
Operating Weight 4wd | 17,226 lbs (7,814 kg) |
Rear Axle Fluid Capacity | 4 gal (14 l) |
Tire Size Front - 2wd / 4wd | 12.5/80 x 18 |
Transmission Fluid Capacity | 5 gal (20 l) |
Turning Radius | 11 ft (3 m) |
Bucket digging force (ISO) | 135 lbs (61 kg) |
Dipper stick Lift Capacity | 5,823 lbs (2,641 kg) |
Front Tires Size | 12L x 16.5 (4WD) |
Max Speed | 24 mph (39 kph) |
Max Speed - Reverse | 29 mph (46 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 4 |
Transmission Type | Power shuttle syncromesh |