Categories ↠ Compact Track Loaders ↠ Case 450CT Series 3

Case 450CT Series 3 Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: Case ➔
Model: 450CT Series 3 ➔

General Specifications

Dimensions

Clearance at Max Lift and Dump	8 ft (2 m)
Ground Clearance	11 in (29 cm)
Height - Top of Cab	7 ft (2 m)
Length - with Bucket	12 ft (4 m)
Length - without Bucket	9 ft (3 m)
Reach at Max Lift and Dump	3 ft (1 m)
Turning Radius from Center - inc bucket	92 in (234 cm)
Turning Radius from Center - machine rear	60 in (152 cm)
Width Over Tracks	7 ft (2 m)

Engine

Aspiration	Turbocharged
Displacement	274 cu in (4,490 cu cm)
Engine Model	445T/M3
Gross Power	90 hp (67 kw)
Net Power	83 hp (62 kw)
Number of Cylinders	4
Peak Torque	288 lbs ft (390 nm)
Power Measured @	2300 rpm
Torque Measured @	1300 rpm

Hydraulic System

Pump Flow	22 gpm (83 lpm)
Pump Type	Gear

Loader

Bucket Capacity	1 cu yd (1 cu m)
Operating Load	3,857 lbs (1,750 kg)
Tipping Angle	7714 degrees

Operating Specifications

Alternator Supplied Amperage	95 amps
Cooling System Fluid Capacity	3 gal (12 l)
Engine Oil Capacity	3 gal (12 l)
Fuel Capacity	21 gal (78 l)
Hydraulic System Fluid Capacity	17 gal (64 l)
Max Speed - high range	8 mph (13 kph)
Max Speed - low range	5 mph (8 kph)
Operating Voltage	12 volts
Operating Weight	10,925 lbs (4,956 kg)

Undercarriage

Ground Contact Area	2,293 cu in (37,576 cu cm)
Ground Pressure	4.8 psi
Length of Track on Ground	5 ft (2 m)
Number of Track Rollers per Side	4
Width of Track	18 in (45 cm)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon