Categories ↠ Compact Track Loaders ↠ Caterpillar 247B2

Caterpillar 247B2 Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: Caterpillar ➔
Model: 247B2 ➔

The Caterpillar 247B2 Compact Track Loader is a versatile and powerful machine designed for a wide range of applications. With a maximum operating weight of 6,997 lbs and an engine gross power of 61 hp, this track loader is capable of handling various tasks with ease. The loader boasts a hydraulic system flow of 15.6 gpm and a breakout force of 4,060 lbs, making it efficient and productive on the job site. Equipped with a comfortable cab meeting safety standards, the Caterpillar 247B2 is a reliable and durable choice for any operator.

See all Caterpillar 247B2s for sale

General Specifications

Cab

FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	9 in (24 cm)
Bucket Pin Height - Maximum Lift	9 ft (3 m)
Clearance at Max Lift and Dump	7 ft (2 m)
Clearance at Maximum Lift and Dump	84 in (213 cm)
Departure Angle	41 degrees
Length - Track on Ground	59 in (150 cm)
Length - with Bucket	11 ft (3 m)
Length - With Bucket on Ground	129 in (328 cm)
Maximum Dump Angle	40 degrees
Maximum Overall Height	150 in (381 cm)
Maximum Reach - With Arms Parallel	55 in (139 cm)
Overall Length - Track	75 in (190 cm)
Rack Back Angle - Maximum Height	96.7 degrees
Reach at Max Lift and Dump	2 ft (1 m)
Reach at Maximum Lift/Dump	25 in (63 cm)
Turn Radius from Center - Bucket	85 in (216 cm)
Turn Radius from Center - Coupler	52 in (132 cm)
Turn Radius from Center - Rear	53 in (136 cm)
Turning Radius from Center - inc bucket	85 in (216 cm)
Turning Radius from Center - machine rear	53 in (136 cm)
Vehicle Width	66 in (168 cm)
Width Over Tracks	6 ft (2 m)

Engine

Bore	3 in (8 cm)
Displacement	134 cu in (2,196 cu cm)
Gross Power	61 hp (45 kw)
Gross Power - SAE J1995	61 hp (45 kw)
Net Power	56 hp (42 kw)
Net Power - SAE 1349	56 hp (42 kw)
Stroke	4 in (10 cm)

Hydraulic System

Hydraulic Flow	Standard
Hydraulic Power	30 hp (23 kw)
Loader Hydraulic Flow	16 gpm (59 lpm)
Loader Hydraulic Pressure	3335 psi
Pump Flow	16 gpm (60 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	4,060 lbs (1,842 kg)
Operating Load	2,050 lbs (930 kg)
Tipping Angle	4100 degrees

Operating Specifications

Alternator Supplied Amperage	85 amps
Breakout Force - Tilt Cylinder	4,060 lbs (1,842 kg)
Cooling System Fluid Capacity	3 gal (10 l)
Engine Oil Capacity	3 gal (10 l)
Fuel Capacity	17 gal (65 l)
Ground Contact Area	1,770 cu in (29,005 cu cm)
Ground Pressure	4 psi
Hydraulic System Fluid Capacity	15 gal (55 l)
Max Speed - high range	8 mph (12 kph)
Max Speed - low range	8 mph (12 kph)
Operating Voltage	12 volts
Operating Weight	6,997 lbs (3,174 kg)
Rated Operating Capacities - 35% Tipping Load	1,435 lbs (651 kg)
Rated Operating Capacities - 50% Tipping Load	2,050 lbs (930 kg)
Tipping Load	4,100 lbs (1,860 kg)

Power Train

Travel Speed Forward	8 mph (12 kph)
Travel Speed Reverse	8 mph (12 kph)

Service Refill Capacities

Cooling System	3 gal (10 l)
Engine Crankcase	3 gal (10 l)
Fuel Tank	17 gal (64 l)
Hydraulic System	15 gal (55 l)
Hydraulic Tank	9 gal (35 l)

Undercarriage

Ground Contact Area	1,770 cu in (29,005 cu cm)
Ground Pressure	4 psi
Length of Track on Ground	5 ft (2 m)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon