List Your Equipment For Free  /  Seller Login


Caterpillar 299C Compact Track Loader

Introducing the Caterpillar 299C Compact Track Loader, a powerful and versatile machine designed for efficiency and performance on the job site. With a gross power of 94 horsepower, a maximum dump angle of 51 degrees, and an operating weight of 10,730 pounds, this compact track loader is equipped to handle a variety of tasks with ease. Featuring a loader hydraulic flow of 22 gpm, a hydraulic system fluid capacity of 15.1 gallons, and ground pressure of 4.3 psi, the Caterpillar 299C is a reliable and capable piece of equipment for any construction or landscaping project.


See all Caterpillar 299Cs for sale

General Specifications

Cab

FOPSSAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level IISAE J231 JAN81 ISO 3449:1992 Level II
ROPSSAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position8 in (20 cm)
Bucket Pin Height - Maximum Lift11 ft (3 m)
Bucket Pin Reach - Maximum Lift15 in (37 cm)
Clearance at Max Lift and Dump8 ft (2 m)
Clearance at Maximum Lift and Dump98 in (249 cm)
Departure Angle38 degrees
Ground Clearance9 in (23 cm)
Height - Top of Cab7 ft (2 m)
Length - Track on Ground70 in (177 cm)
Length - with Bucket13 ft (4 m)
Length - With Bucket on Ground150 in (382 cm)
Maximum Dump Angle51 degrees
Maximum Overall Height162 in (412 cm)
Maximum Reach - With Arms Parallel50 in (127 cm)
Overall Length - Track89 in (227 cm)
Rack Back Angle - Maximum Height83 degrees
Reach at Max Lift and Dump3 ft (1 m)
Reach at Maximum Lift/Dump30 in (76 cm)
Turn Radius from Center - Bucket91 in (231 cm)
Turn Radius from Center - Coupler58 in (147 cm)
Turn Radius from Center - Rear70 in (178 cm)
Turning Radius from Center - inc bucket91 in (232 cm)
Turning Radius from Center - machine rear70 in (178 cm)
Vehicle Width78 in (198 cm)
Width Over Tracks7 ft (2 m)

Engine

AspirationTurbocharged
Bore4 in (9 cm)
Displacement201 cu in (3,294 cu cm)
Engine ModelCat C3.4T
Gross Power94 hp (70 kw)
Gross Power - SAE J199594 hp (70 kw)
Net Power90 hp (67 kw)
Net Power - SAE 134990 hp (67 kw)
Number of Cylinders4
Power Measured @2500 rpm
Stroke5 in (12 cm)

Hydraulic System

Hydraulic Flow (1)Standard
Hydraulic Flow (2)High Flow XPS
Hydraulic Power43 hp (32 kw)
Loader Hydraulic Flow22 gpm (83 lpm)
Loader Hydraulic Pressure3335 psi
Maximum Loader Hydraulic Flow33 gpm (125 lpm)
Maximum Loader Hydraulic Pressure4061 psi
Pump Flow22 gpm (84 lpm)
Relief Valve Pressure3335 psi

Loader

Breakout Force7,308 lbs (3,315 kg)
Bucket Capacity1 cu yd (0 cu m)
Operating Load4,150 lbs (1,882 kg)
Tipping Angle8338 degrees

Operating Specifications

Alternator Supplied Amperage90 amps
Breakout Force - Tilt Cylinder7,308 lbs (3,315 kg)
Cooling System Fluid Capacity4 gal (14 l)
Engine Oil Capacity3 gal (10 l)
Fuel Capacity26 gal (98 l)
Ground Contact Area2,504 cu in (41,033 cu cm)
Ground Pressure4.3 psi
Hydraulic System Fluid Capacity15 gal (57 l)
Max Speed - high range9 mph (14 kph)
Max Speed - low range5 mph (8 kph)
Operating Voltage12 volts
Operating Weight10,730 lbs (4,867 kg)
Rated Operating Capacities - 35% Tipping Load2,905 lbs (1,318 kg)
Rated Operating Capacities - 50% Tipping Load4,150 lbs (1,882 kg)
Rated Operating Capacity with Optional Counterweight4,418 lbs (2,004 kg)
Tipping Load8,338 lbs (3,782 kg)

Power Train

Travel Speed Forward5 mph (8 kph)
Travel Speed Forward - 2-Speed9 mph (14 kph)
Travel Speed Reverse5 mph (8 kph)
Travel Speed Reverse - 2-Speed9 mph (14 kph)

Service Refill Capacities

Cooling System4 gal (14 l)
Engine Crankcase3 gal (10 l)
Fuel Tank26 gal (98 l)
Hydraulic System15 gal (57 l)
Hydraulic Tank11 gal (42 l)

Undercarriage

Ground Contact Area2,504 cu in (41,033 cu cm)
Ground Pressure4.3 psi
Length of Track on Ground6 ft (2 m)

Weights

Operating Weight10,730 lbs (4,867 kg)

  • Caterpillar 299Cs currently for sale
  • A Caterpillar 299C From Carter Machinery for $27,500.00 USD





  • \\ \\ \\