Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Ground Clearance | 2 ft (1 m) |
Height - Top of Cab | 12 ft (4 m) |
Length of Track on Ground | 11 ft (3 m) |
Length w/o Blade | 16 ft (5 m) |
Width Over Tracks | 10 ft (3 m) |
Aspiration | Intercooled and turbocharged |
Displacement | 793 cu in (12,995 cu cm) |
Engine Model | D 9406 TI-E A3 |
Max Torque | 1,129 lbs ft (1,531 nm) |
Net Power | 324 hp (242 kw) |
Number of Cylinders | 6 |
Power Measured @ | 1800 rpm |
Torque Measured @ | 1200 rpm |
Pump Flow Capacity | 89 gpm (337 lpm) |
Pump type | Variable-displacement piston pump with load-sensing proprotional pump flow control |
Relief Valve Pressure | 2900 psi |
Alternator Supplied Amperage | 80 amps |
Cooling System Fluid Capacity | 18 gal (68 l) |
Engine Oil Capacity | 6 gal (24 l) |
Final Drives Fluid Capacity | 6 gal (21 l) |
Fuel Capacity | 161 gal (609 l) |
Hydraulic Fluid Capacity | 55 gal (208 l) |
Operating Voltage | 24 volts |
Operating Weight | 77,445 lbs (35,129 kg) |
Blade Angle (both directions) | 25 degrees |
Capacity | 28 cu yd (21 cu m) |
Height | 97 in (245 cm) |
Width | 14 ft (4 m) |
Max Speed - Forward | 7 mph (11 kph) |
Max Speed - Reverse | 7 mph (11 kph) |
Number of Forward Gears | 3 |
Number of Reverse Gears | 3 |
Transmission Type | Dual-path electronic-controlled closed-loop hydrostatic drive |
Ground Contact Area | 6,000 cu in (98,323 cu cm) |
Ground Pressure | 12.9 psi |
Number of Shoes per Side | 44 |
Number of Track Rollers per Side | 7 |
Track Pitch | 9 in (22 cm) |