Hyster H100FT Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H100FT ➔

General Specifications

Brakes

Parking brake	Hand/Mechanical
Service brake	Foot/Hydraulic

Dimensions

Gradeability	29%
Ground Clearance	9 in (24 cm)
Height to Top of Overhead Guard	8 ft (2 m)
Length to Fork Face	11 ft (3 m)
Max Fork Height	9 ft (3 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	5 ft (1 m)
Right Angle Stack	11 ft (3 m)
Turning Radius	9 ft (3 m)
Wheelbase	7 ft (2 m)

Engine

Displacement	263 cu in (4,310 cu cm)
Engine Model	PSI 4.3L V6
Fuel Type	LPG
Number of Cylinders	6
Power	88 hp (66 kw)
Power Measured @	2200 rpm
Torque	210 lbs ft (285 nm)
Torque Measured @	2200 rpm

MAST

Lift Speed	98 ft/min (30 m/min)
Load Capacity	10,000 lbs (4,536 kg)
Load Center	24 in (61 cm)
Lower Speed	100 ft/min (30 m/min)
Mast Tip Forward	6 degrees
Mast Tip Rear	10 degrees
Max Fork Spread	50 in (126 cm)

Operating Specifications

Axle load - front	6,642 lbs (3,013 kg)
Axle load - rear	8,268 lbs (3,750 kg)
Drawbar Pull	6,914 lbs (3,136 kg)
Front Tire Size	300 x 15 - 20 Ply
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	18 gal (68 l)
Max Speed	12 mph (19 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	14,910 lbs (6,763 kg)
Rear Tire Size	7.00 x 12 - 14 Ply
Tire Type	Pneumatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon