Categories ↠ Forklifts ↠ Hyster H155FT Diesel

Hyster H155FT Diesel Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H155FT Diesel ➔

General Specifications

Dimensions

Gradeability	33%
Ground Clearance	10 in (25 cm)
Height to Top of Overhead Guard	8 ft (3 m)
Length to Fork Face	12 ft (4 m)
Max Fork Height	18 ft (5 m)
Overall Height - mast lowered	12 ft (4 m)
Overall Width	7 ft (2 m)
Right Angle Stack	13 ft (4 m)
Track width front	6 ft (2 m)
Track width rear	5 ft (2 m)
Turning Radius	11 ft (3 m)
Wheelbase	7 ft (2 m)

Engine

Displacement	230 cu in (3,769 cu cm)
Engine Model	Cummins 4.5L
Fuel Type	Diesel
Number of Cylinders	4
Power	105 hp (78 kw)
Power Measured @	2200 rpm
Torque	275 lbs ft (373 nm)
Torque Measured @	1600 rpm

MAST

Lift Speed	96 ft/min (29 m/min)
Load Capacity	15,432 lbs (7,000 kg)
Load Center	24 in (61 cm)
Lower Speed	81 ft/min (25 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	10 degrees
Max Fork Spread	74 in (188 cm)

Operating Specifications

Axle load - front	9,215 lbs (4,180 kg)
Axle load - rear	11,687 lbs (5,301 kg)
Fuel Capacity	20 gal (75 l)
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	19 gal (72 l)
Max Speed	14 mph (22 kph)
Number of Front Wheels	4
Number of Rear Wheels	2
Operating Weight	20,902 lbs (9,481 kg)
Tire Type	Pneumatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon