Hyster H175FT Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H175FT ➔

General Specifications

Brakes

Parking brake	Hand/Mechanical
Service brake	Foot/Hydraulic

Dimensions

Gradeability	29%
Ground Clearance	10 in (25 cm)
Height to Top of Overhead Guard	8 ft (3 m)
Length to Fork Face	13 ft (4 m)
Overall Height - mast lowered	13 ft (4 m)
Overall Width	7 ft (2 m)
Right Angle Stack	15 ft (4 m)
Track width front	7 ft (2 m)
Track width rear	5 ft (2 m)
Turning Radius	13 ft (4 m)
Wheelbase	8 ft (2 m)

Engine

Displacement	230 cu in (3,769 cu cm)
Engine Make	Kubota
Fuel Type	Diesel
Number of Cylinders	4
Power	74 hp (55 kw)
Power Measured @	2200 rpm
Torque	227 lbs ft (308 nm)
Torque Measured @	1400 rpm

MAST

Lift Speed	67 ft/min (20 m/min)
Load Capacity	17,637 lbs (8,000 kg)
Load Center	24 in (60 cm)
Lower Speed	73 ft/min (22 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	9 degrees

Operating Specifications

Axle load - front	11,367 lbs (5,156 kg)
Axle load - rear	15,415 lbs (6,992 kg)
Drawbar Pull	12,000 lbs (5,443 kg)
Front Tire Size	8.25 X 15 14PR
Fuel Capacity	20 gal (75 l)
Hydraulic Tank	19 gal (72 l)
Max Speed	13 mph (21 kph)
Number of Front Wheels	4
Number of Rear Wheels	2
Operating Weight	26,782 lbs (12,148 kg)
Rear Tire Size	8.25 X 15 14PR
Tire Type	Pneumatic

Hyster H175FTs currently for sale

A 2018 Hyster H175FT From Miller Equipment Co. for $49,850.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon