Hyster H400HD Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H400HD ➔

General Specifications

Brakes

Parking brake	Dry Disc on Drive Axle
Service brake	Oil immersed (wet) disc

Dimensions

Gradeability	39%
Ground Clearance	15 in (38 cm)
Height to Top of Overhead Guard	11 ft (3 m)
Length to Fork Face	19 ft (6 m)
Max Fork Height	15 ft (5 m)
Overall Height - mast lowered	14 ft (4 m)
Overall Width	10 ft (3 m)
Right Angle Stack	32 ft (10 m)
Turning Radius	17 ft (5 m)
Wheelbase	12 ft (4 m)

Engine

Alternator	120 amps
Battery	900 CCA
Displacement	409 cu in (6,701 cu cm)
Emission Tier Level	TIER 4F
Engine Make	Cummins
Engine Model	QSB 6.7L
Fuel Type	Diesel
Number of Cylinders	6
Power	220 hp (164 kw)
Power Measured @	2000 rpm
Torque	700 lbs ft (949 nm)
Torque Measured @	1500 rpm

MAST

Lift Speed	89 ft/min (27 m/min)
Load Capacity	40,000 lbs (18,144 kg)
Load Center	36 in (91 cm)
Lower Speed	98 ft/min (30 m/min)
Mast Tip Forward	10 degrees
Mast Tip Rear	12 degrees
Max Fork Spread	94 in (240 cm)

Operating Specifications

Axle load - front	91,165 lbs (41,352 kg)
Axle load - rear	7,785 lbs (3,531 kg)
DEF tank capacity	10 gal (38 l)
Drawbar Pull	48,400 lbs (21,954 kg)
Front Tire Size	14.00 x 24
Fuel Capacity	80 gal (303 l)
Hydraulic System Fluid Capacity	54 gal (204 l)
Max Speed	16 mph (26 kph)
Operating Voltage	24 volts
Operational Weight	59,399 lbs (26,943 kg)
Rear Tire Size	14.00 x 24
Tire Type	Pneumatic

Transmission

Drive system	Powershift Transmission
Number of Forward / Reverse Speeds	5-3
Transmission Type	ZF WG 211

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon