Hyster H40FTS Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H40FTS ➔

General Specifications

Dimensions

Gradeability	24%
Ground Clearance	6 in (15 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	8 ft (2 m)
Max Fork Height	11 ft (3 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Right Angle Stack	8 ft (2 m)
Turning Radius	7 ft (2 m)
Wheelbase	5 ft (1 m)

Engine

Displacement	122 cu in (1,998 cu cm)
Engine Model	PSI 2.0L
Fuel Type	LPG
Number of Cylinders	4
Power	44 hp (33 kw)
Torque	100 lbs ft (136 nm)
Torque Measured @	1300 rpm

MAST

Lift Speed	118 ft/min (36 m/min)
Load Capacity	4,000 lbs (1,814 kg)
Load Center	24 in (61 cm)
Lower Speed	92 ft/min (28 m/min)
Mast Tip Forward	6 degrees
Mast Tip Rear	6 degrees
Max Fork Spread	38 in (96 cm)

Operating Specifications

Axle load - front	2,750 lbs (1,247 kg)
Axle load - rear	4,134 lbs (1,875 kg)
Drawbar Pull	2,546 lbs (1,155 kg)
Front Tire Size	6.50 x 10 - 10
Max Speed	13 mph (22 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Voltage	12 volts
Operating Weight	6,884 lbs (3,123 kg)
Rear Tire Size	5.00 x 8.00
Tire Type	Pneumatic

Transmission

Number of Forward / Reverse Speeds

1-1

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon