Hyster H40XT Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: H40XT ➔

General Specifications

Brakes

Parking brake	Hand/Mechanical
Service brake	Foot/Hydraulic

Dimensions

Gradeability	35.9%
Ground Clearance	8 in (19 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	8 ft (3 m)
Max Fork Height	11 ft (3 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Right Angle Stack	9 ft (3 m)
Turning Radius	7 ft (2 m)
Wheelbase	5 ft (2 m)

Engine

Displacement	143 cu in (2,343 cu cm)
Engine Model	PSI 2.4L
Fuel Type	LPG
Number of Cylinders	4
Power	62 hp (46 kw)
Power Measured @	2700 rpm
Torque	124 lbs ft (168 nm)
Torque Measured @	1600 rpm

MAST

Lift Speed	128 ft/min (39 m/min)
Load Capacity	4,000 lbs (1,814 kg)
Load Center	24 in (61 cm)
Lower Speed	114 ft/min (35 m/min)
Mast Tip Forward	6 degrees
Mast Tip Rear	6 degrees

Operating Specifications

Axle load - front	3,855 lbs (1,749 kg)
Axle load - rear	4,311 lbs (1,955 kg)
Drawbar Pull	4,947 lbs (2,244 kg)
Front Tire Size	7.00 x 12 - 12
Fuel Capacity	18 gal (69 l)
Hydraulic System Relief Valve Pressure	2550 psi
Hydraulic Tank	11 gal (42 l)
Max Speed	12 mph (19 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	8,170 lbs (3,706 kg)
Rear Tire Size	6.00 x 9
Tire Type	Pneumatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon