Hyster S100FT Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: S100FT ➔

General Specifications

Dimensions

Gradeability	32%
Ground Clearance	6 in (16 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	9 ft (3 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Turning Radius	8 ft (2 m)
Wheelbase	6 ft (2 m)

Engine

Displacement	230 cu in (3,769 cu cm)
Engine Make	Kubota
Engine Model	WG3800 LPG
Number of Cylinders	4
Power	91 hp (68 kw)
Power Measured @	2400 rpm
Torque	221 lbs ft (300 nm)
Torque Measured @	1000 rpm

MAST

Lift Speed	112 ft/min (34 m/min)
Load Capacity	10,000 lbs (4,536 kg)
Load Center	24 in (61 cm)
Lower Speed	108 ft/min (33 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	6 degrees

Operating Specifications

Axle load - front	6,338 lbs (2,875 kg)
Axle load - rear	8,991 lbs (4,078 kg)
Drawbar Pull	3,803 lbs (1,725 kg)
Front Tire Size	22 X 12 x 16
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	21 gal (78 l)
Max Speed	11 mph (17 kph)
Number of Front Wheels	2X
Number of Rear Wheels	2
Operating Weight	15,329 lbs (6,953 kg)
Rear Tire Size	18 x 8 x 12.2
Tire Type	Cushion

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon