Hyster S50CT2 Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: S50CT2 ➔

General Specifications

Dimensions

Gradeability	30%
Ground Clearance	5 in (12 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	8 ft (2 m)
Max Fork Height	14 ft (4 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Right Angle Stack	8 ft (2 m)
Turning Radius	6 ft (2 m)
Wheelbase	5 ft (1 m)

Engine

Displacement	143 cu in (2,343 cu cm)
Engine Model	PSI 2.4L
Fuel Type	LP/Gas
Number of Cylinders	4
Power	44 hp (33 kw)
Power Measured @	2600 rpm
Torque	118 lbs ft (160 nm)
Torque Measured @	1200 rpm

MAST

Lift Speed	124 ft/min (38 m/min)
Load Capacity	5,000 lbs (2,268 kg)
Load Center	24 in (61 cm)
Lower Speed	96 ft/min (29 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	5 degrees

Operating Specifications

Axle load - front	3,115 lbs (1,413 kg)
Axle load - rear	4,812 lbs (2,183 kg)
Drawbar Pull	3,020 lbs (1,370 kg)
Front Tire Size	21 x 7 x 15
Hydraulic System Relief Valve Pressure	2306 psi
Hydraulic Tank	8 gal (30 l)
Max Speed	11 mph (18 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	7,928 lbs (3,596 kg)
Rear Tire Size	16 x 5 x 10.5
Tire Type	Cushion

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon