Hyster S60FT Forklift

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: S60FT ➔

General Specifications

Dimensions

Gradeability	28%
Ground Clearance	5 in (13 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	8 ft (2 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Right Angle Stack	8 ft (2 m)
Turning Radius	7 ft (2 m)
Wheelbase	5 ft (1 m)

Engine

Displacement	143 cu in (2,343 cu cm)
Engine Make	Kubota 2.5L
Engine Model	PSI 2.4L
Number of Cylinders	4
Power	59 hp (44 kw)
Power Measured @	2700 rpm
Torque	121 lbs ft (164 nm)
Torque Measured @	2000 rpm

MAST

Lift Speed	124 ft/min (38 m/min)
Load Capacity	6,001 lbs (2,722 kg)
Load Center	24 in (61 cm)
Lower Speed	114 ft/min (35 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	5 degrees

Operating Specifications

Axle load - front	3,474 lbs (1,576 kg)
Axle load - rear	6,294 lbs (2,855 kg)
Drawbar Pull	5,234 lbs (2,374 kg)
Front Tire Size	21 X 8 x 15
Fuel Capacity	11 gal (40 l)
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	10 gal (36 l)
Max Speed	11 mph (18 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	9,114 lbs (4,134 kg)
Rear Tire Size	16 x 6 x 10.5
Tire Type	Cushion

Hyster S60FTs currently for sale

A 2013 Hyster S60FT From Ritchie Bros. Auctioneers for Auction Pricing

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon