Categories ↠ Forklifts ↠ Toyota 8BNCU20/18.5

Toyota 8BNCU20/18.5 Forklift

Category: Forklifts ➔
Manufacturer: Toyota ➔
Model: 8BNCU20/18.5 ➔

General Specifications

Brakes

pedals

Plugging / Electric Disc Brake

Dimensions

Gradeability	15%
Ground Clearance	4 in (10 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	6 ft (2 m)
Max Fork Height	16 ft (5 m)
Overall Height - mast lowered	7 ft (2 m)
Right Angle Stack	6 ft (2 m)
Turning Radius	5 ft (1 m)
Wheelbase	4 ft (1 m)

Electrical System

Battery Length	39 in (98 cm)
Battery Width	19 in (47 cm)
Battery capacity	1085 AH
Battery Height	32 in (82 cm)
Battery Weight	2,300 lbs (1,043 kg)
Control Load Handling	Transistor Ã¢â?¬â?? MOSFET
Control Power Steering	Contactor
Control Drive	Transistor Ã¢â?¬â?? MOSFET
Motor Drive	7 hp (5 kw)
Motor Drive Type	4 Pole Induction AC 3-Phase
Motor Hydrostatic Power Steering	Permanent Magnet DC
Motor Load Handling (hydraulic)	14 hp (11 kw)
Voltage	36 V

Engine

Engine Make

TOYOTA

Hydraulic System

Auxiliary Flow Rate	10 gpm (38 lpm)
Maximum operating pressure	2000 psi

MAST

Lift Speed	60 ft/min (18 m/min)
Load Capacity	4,000 lbs (1,814 kg)
Load Center	24 in (61 cm)
Lower Speed	100 ft/min (31 m/min)
Mast Tip Forward	3 degrees
Mast Tip Rear	5 degrees
Max Fork Spread	188 in (478 cm)

Operating Specifications

Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	6,865 lbs (3,114 kg)
Tire Type	Solid Rubber

Transmission

Max Speed - Forward	8 mph (12 kph)
Max Speed - Reverse	8 mph (12 kph)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon