Toyota 8FDU18 Forklift

Category: Forklifts ➔
Manufacturer: Toyota ➔
Model: 8FDU18 ➔

General Specifications

Brakes

Parking brake	Mechanical
Service brake	Hydraulic

Dimensions

Free lift	6 in (15 cm)
Gradeability	45%
Ground Clearance	4 in (10 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	8 ft (2 m)
Max Fork Height	11 ft (3 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Right Angle Stack	8 ft (2 m)
Turning Radius	7 ft (2 m)
Wheelbase	5 ft (1 m)

Engine

Battery	12 V
Displacement	110 cu in (1,803 cu cm)
Engine Make	TOYOTA
Engine Model	1ZS
Fuel Type	Diesel
Number of Cylinders	3
Power	53 hp (40 kw)
Power Measured @	2200 rpm
Torque	128 lbs ft (174 nm)
Torque Measured @	1800 rpm

Hydraulic System

Main pump flow standard	17 gpm (64 lpm)
Maximum operating pressure	2275 psi

MAST

Lift Speed	128 ft/min (39 m/min)
Load Capacity	3,527 lbs (1,600 kg)
Load Center	24 in (60 cm)
Lower Speed	98 ft/min (30 m/min)
Mast Tip Forward	6 degrees
Mast Tip Rear	11 degrees
Max Fork Spread	36 in (91 cm)

Operating Specifications

Drawbar Pull	3,924 lbs (1,780 kg)
Fuel Capacity	12 gal (45 l)
Max Speed	12 mph (19 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	6,063 lbs (2,750 kg)
Tire Type	Pneumatic

Tires

Front Tires Size	6.50-10-10PR (1)
Rear Tires Size	5.00-8-8PR (1)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon