Toyota 8FGC60U Forklift

Category: Forklifts ➔
Manufacturer: Toyota ➔
Model: 8FGC60U ➔

General Specifications

Dimensions

Fork Spread Max	4 ft (1 m)
Fork Spread Min-outer edge to edge	12 in (30 cm)
Forward Tilt	5 degrees
Free lift	5 in (13 cm)
Gradeability	31%
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	10 ft (3 m)
Max Fork Height	10 ft (3 m)
Overall Height - mast lowered	10 ft (3 m)
Overall Width	5 ft (1 m)

Electrical System

Battery

12 V /48 Ah

Engine

Displacement	224 cu in (3,671 cu cm)
Engine Make	TOYOTA
Engine Model	1FS
Number of Cylinders	4
Power	89 hp (66 kw)
Power Measured @	2550 rpm
Torque	214 lbs ft (290 nm)
Torque Measured @	1400 rpm

MAST

Lift height- largest mast	175 in (444 cm)
Lift height-smallest mast	95 in (240 cm)
Load Capacity	13,228 lbs (6,000 kg)
Mast Tip Forward	5 degrees
Mast Tip Rear	6 degrees
Max Fork Spread	46 in (117 cm)

Operating Specifications

Auxiliary hydraulic flow	34 gpm (128 lpm)
Hydraulic System Relief Valve Pressure	2990 psi
Max Speed	13 mph (21 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	19,070 lbs (8,650 kg)
Tire Type	Cushion

Performance

Drawbar Pull Max -Full Load	9,921 lbs (4,500 kg)
Drawbar Pull Max -No Load	4,167 lbs (1,890 kg)

Transmission

Speed ranges (forwards/backward)	1-1
Transmission Type	Power shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon