Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Max Cutting Height | 19 ft (6 m) |
Max Digging Depth | 12 ft (4 m) |
Max Loading Height | 14 ft (4 m) |
Max Reach Along Ground | 19 ft (6 m) |
Max Vertical Wall Digging Depth | 9 ft (3 m) |
Shipping Height of Unit | 9 ft (3 m) |
Shipping Length of Unit | 17 ft (5 m) |
Maximum Bucket Capacity | 0 cu yd (0 cu m) |
Minimum Bucket Capacity | 0 cu yd (0 cu m) |
Reference Bucket Capacity | 0 cu yd (0 cu m) |
Ground Clearance | 1 ft (0 m) |
Height - Top of Cab | 9 ft (3 m) |
Removal Counterweight Clearance | 2 ft (1 m) |
Tail Swing Radius | 3 ft (1 m) |
Width to Outside of Tracks | 7 ft (2 m) |
Displacement | 134 cu in (2,188 cu cm) |
Engine Model | 4TNV88-BXYB |
Max Torque | 103 lbs ft (139 nm) |
Net Power | 40 hp (30 kw) |
Number of Cylinders | 4 |
Power Measured @ | 2400 rpm |
Torque Measured @ | 1440 rpm |
Alternator Supplied Amperage | 40 amps |
Cooling System Fluid Capacity | 2 gal (6 l) |
Engine Oil Capacity | 2 gal (8 l) |
Fuel Capacity | 14 gal (53 l) |
Hydraulic Pump Flow Capacity | 30 gpm (114 lpm) |
Hydraulic System Fluid Capacity | 17 gal (64 l) |
Hydraulic System Relief Valve Pressure | 3336 psi |
Operating Voltage | 12 volts |
Operating Weight | 10,261 lbs (4,654 kg) |
Swing Speed | 8.8 rpm |
Drawbar Pull | 12,170 lbs (5,520 kg) |
Ground Pressure | 3.9 psi |
Max Travel Speed | 3 mph (5 kph) |
Number of Carrier Rollers per Side | 1 |
Number of Track Rollers per Side | 5 |
Shoe Size | 16 in (40 cm) |