Categories ↠ Motor Graders ↠ John Deere 772D

John Deere 772D Motor Grader

Category: Motor Graders ➔
Manufacturer: John Deere ➔
Model: 772D ➔

The John Deere 772D Motor Grader boasts impressive power and performance for any grading job. With a turbocharged engine producing up to 230 horsepower, this machine can handle a variety of tasks with ease. Its versatile operating specifications, such as a hydraulic system pump flow of 54.7 gpm and a circle rotation of 360 degrees, ensure efficiency and precision on the job site. From its moldboard blade pull of 43,200 lbs to its comfortable Isomount cab, the 772D is a reliable and capable choice for any grading project.

See all John Deere 772Ds for sale

General Specifications

Circle

Blade Tip Angle - Front	42 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	60 in (152 cm)
Max Lift Above Ground	19 in (47 cm)
Max Reach Outside Tires - Left	83 in (210 cm)
Max Reach Outside Tires - Right	82 in (208 cm)
Rotation	360 degrees
Shift Left	31 in (79 cm)
Shift Right	29 in (73 cm)

Dimensions

Blade Base	9 ft (3 m)
Front Ground Clearance	2 ft (1 m)
Height to Top of Isomount Cab	11 ft (3 m)
Overall Length	29 ft (9 m)
Tandem Axle Wheelbase	5 ft (2 m)
Wheelbase	20 ft (6 m)
Width Over Tires	8 ft (3 m)

Engine

Aspiration	Turbocharged with air-to-air aftercooler
Displacement	494 cu in (8,095 cu cm)
Engine Model	6081H
Max Power	230 hp (172 kw)
Net Power Gear 1-2	185 hp (138 kw)
Net Power Gear 4-6	215 hp (160 kw)
Net Power Gear 5-6	230 hp (172 kw)
Net Power Gears 7-8	215 hp (160 kw)
Net Torque Gears 1-2	738 lbs ft (1,001 nm)
Net Torque Gears 3-4	778 lbs ft (1,055 nm)
Net Torque Gears 5-6	929 lbs ft (1,260 nm)
Net Torque Gears 7-8	929 lbs ft (1,260 nm)
Number of Cylinders	6
Power Measured @	2000 rpm
Torque Measured @	1000 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	32 degrees
Wheel Lean	20 degrees

Hydraulic System

Pump Flow	55 gpm (207 lpm)
Pump Type	Variable displacement piston
Relief Valve Pressure	2750 psi

Moldboard

Blade Pull at Max Weight	43,200 lbs (19,595 kg)
Moldboard Height	24 in (61 cm)
Moldboard Thickness	1 in (2 cm)
Moldboard Width	12 ft (4 m)
Side Shift Left	27 in (68 cm)
Side Shift Right	27 in (68 cm)

Operating Specifications

Alternator Supplied Amperage	100 amps
Circle Gearbox Fluid Capacity	2 gal (6 l)
Cooling System Fluid Capacity	13 gal (49 l)
Fuel Capacity	106 gal (401 l)
Hydraulic System Fluid Capacity	14 gal (53 l)
Max Operation Weight - Front Axle	15,840 lbs (7,185 kg)
Max Operation Weight - Rear Axle	32,159 lbs (14,587 kg)
Max Operation Weight - Total	47,999 lbs (21,772 kg)
Operating Voltage	24 volts
Rear Diff/Final Drive Fluid Capacity	10 gal (36 l)
Std Operation Weight - Front Axle	9,620 lbs (4,364 kg)
Std Operation Weight - Rear Axle	24,660 lbs (11,186 kg)
Std Operation Weight - Total	34,280 lbs (15,549 kg)
Tandem Case Fluid Capacity (each)	20 gal (76 l)
Tire Size	14.00R24 Radial PR
Transmission Fluid Capacity	6 gal (23 l)

Steering System

Articulation Angle	22 degrees
Turning Radius	24 ft (7 m)

Transmission

Max Speed - Forward	26 mph (42 kph)
Max Speed - Reverse	26 mph (42 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	8
Transmission Type	Powershift with direct drive

John Deere 772Ds currently for sale

A 2007 John Deere 772D From Brandt Tractor LTD for $82,622.00 USD

A 2007 John Deere 772D From McCoy Construction & Forestry for $82,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon