Categories ↠ Motor Graders ↠ New Holland RG80

New Holland RG80 Motor Grader

Category: Motor Graders ➔
Manufacturer: New Holland ➔
Model: RG80 ➔

General Specifications

Circle

Diameter	53 in (134 cm)
Max Lift Above Ground	15 in (39 cm)
Max Reach Outside Tires - Left	71 in (179 cm)
Max Reach Outside Tires - Right	76 in (194 cm)
Rotation	360 degrees

Dimensions

Height to Top of Isomount Cab	10 ft (3 m)
Overall Length	22 ft (7 m)
Width Over Tires	8 ft (2 m)

Engine

Bore	5 in (11 cm)
Displacement	304 cu in (4,980 cu cm)
Engine Model	Genesis 5.0
Max Power	76 hp (57 kw)
Number of Cylinders	4
Power Measured @	2200 rpm
Stroke	5 in (13 cm)
Torque	240 lbs ft (325 nm)
Torque Measured @	1400 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	20 degrees
Wheel Lean	18 degrees

Hydraulic System

Pump Flow	10 gpm (38 lpm)
Pump Type	BARNS gear pump
Relief Valve Pressure	1850 psi

Moldboard

Moldboard Height	16 in (42 cm)
Moldboard Thickness	1 in (2 cm)
Moldboard Width	10 ft (3 m)

Operating Specifications

Alternator Supplied Amperage	100 amps
Operating Voltage	24 volts
Std Operation Weight - Front Axle	4,557 lbs (2,067 kg)
Std Operation Weight - Rear Axle	10,943 lbs (4,964 kg)
Std Operation Weight - Total	15,500 lbs (7,031 kg)
Tire Size	15.00*19.5 -8 PR (G2)

Steering System

Articulation Angle	25 degrees
Turning Radius	19 ft (6 m)

Transmission

Max Speed - Forward	25 mph (40 kph)
Max Speed - Reverse	17 mph (27 kph)
Number of Gears - Forward	6
Number of Gears - Reverse	3
Transmission Type	Torque converter/ Power shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon