Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Articulated/Rigid | A Starting 2019 Model Year |
Drive Configuration | 6x6 Starting 2019 Model Year |
Drive System Mech/Electr. | M Starting 2019 Model Year |
Engine Type | Scania DC13 Starting 2019 Model Year |
Mfg. Model | DA40-5 Starting 2019 Model Year |
Operating Weight Pounds (Kgs) | 158,292 (71,800) Starting 2019 Model Year |
Rated Payload Tons (Metric Tons) | 44 (40) Starting 2019 Model Year |
Articulating/Rigid | Articulated |
Dump Ground Clearance | 3 ft (1 m) |
Overall Height | 13 ft (4 m) |
Overall Length | 35 ft (11 m) |
Drive Config | 6x6 |
Dump Angle | 70 degrees |
Rated Payload | 88,185 lbs (40,000 kg) |
Bore | 5 in (13 cm) |
Displacement | 775 cu in (12,702 cu cm) |
Engine Model | DC 13 |
Gross Power | 493 hp (368 kw) |
Make | Scania |
Max Torque | 1,750 lbs ft (2,373 nm) |
Net Power | 483 hp (360 kw) |
Number of Cylinders | 6 |
Power Measured @ | 1900 rpm |
Stroke | 6 in (16 cm) |
Torque Measured @ | 1300 rpm |
Cooling System Fluid Capacity | 13 gal (50 l) |
Engine Oil Capacity | 12 gal (44 l) |
Fuel Capacity | 140 gal (530 l) |
Operating Voltage | 24 volts |
Transmission Fluid Capacity | 20 gal (75 l) |
Max Speed | 34 mph (55 kph) |
Number of Forward Gears | 8 |
Number of Reverse Gears | 4 |
Front Axle - empty | 32,064 lbs (14,544 kg) |
Front Axle - loaded | 31 lbs (14 kg) |
Operating Weight | 158,292 lbs (71,800 kg) |
Rear Axle - empty | 34,736 lbs (15,756 kg) |
Rear Axle - loaded | 106,940 lbs (48,507 kg) |