Categories ↠ Skid Steer Loaders ↠ Case 410 III

Case 410 III Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Case ➔
Model: 410 III ➔

General Specifications

Dimensions

Clearance at Max Lift and Dump	8 ft (2 m)
Ground Clearance	8 in (21 cm)
Height - Top of Cab	7 ft (2 m)
Length w/o Bucket	8 ft (2 m)
Length with Bucket	10 ft (3 m)
Reach at Max Lift and Dump	24 in (60 cm)
Turning Radius from Center - inc bucket	73 in (186 cm)
Turning Radius from Center - machine rear	54 in (137 cm)
Wheelbase	4 ft (1 m)
Width Over Tires	5 ft (2 m)

Engine

Aspiration	Turbocharged
Displacement	134 cu in (2,201 cu cm)
Engine Model	422T/M3 diesel Tier III certified
Number of Cylinders	4
Power Measured @	2900 rpm

Hydraulic System

Pump Flow Capacity	20 gpm (74 lpm)
Pump Type	Gear
Relief Valve Pressure	3050 psi

Loader

Breakout Force	3751 psi
Bucket Capacity	1 cu yd (0 cu m)
Operating Load Rating	1,501 lbs (681 kg)
Tipping Angle	3000.5 degrees

Operating Specifications

Alternator Supplied Amperage	55 amps
Chain Box Fluid Capacity - each side	2 gal (8 l)
Cooling System Fluid Capacity	3 gal (12 l)
Engine Oil Fluid Capacity	3 gal (11 l)
Fuel Capacity	22 gal (84 l)
Hydraulic System Fluid Capacity	13 gal (50 l)
Max Speed	7 mph (10 kph)
Operating Speed	7 mph (10 kph)
Operating Voltage	12 volts
Operational Weight	5,430 lbs (2,463 kg)
Tire Size	10.00 x 16.5 8 ply

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon