Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
ENGINE POWER HP (KW) | 49 (36.4) Starting 2020 Model Year |
OPERATING LOAD LBS. (KG) | 1,300 (590) Starting 2016 Model Year |
OPERATING WIDTH IN. (CM) | 59.8 (151.89) Starting 2020 Model Year |
RATED OPERATING CAPACITY LBS. (KG) (50%) | 1,300 (590) Starting 2020 Model Year |
Clearance at Max Lift and Dump | 7 ft (2 m) |
Ground Clearance | 7 in (18 cm) |
Height - Top of Cab | 6 ft (2 m) |
Length w/o Bucket | 8 ft (2 m) |
Length with Bucket | 10 ft (3 m) |
Reach at Max Lift and Dump | 19 in (47 cm) |
Turning Radius from Center - inc bucket | 76 in (192 cm) |
Turning Radius from Center - machine rear | 56 in (143 cm) |
Wheelbase | 3 ft (1 m) |
Width Over Tires | 5 ft (2 m) |
Aspiration | Natural |
Displacement | 122 cu in (1,999 cu cm) |
Engine Model | ISM N844T/M3 |
Gross Power | 43 hp (32 kw) |
Max Torque | 96 lbs ft (131 nm) |
Number of Cylinders | 4 |
Power Measured @ | 2900 rpm |
Torque Measured @ | 1750 rpm |
Pump Flow Capacity | 16 gpm (59 lpm) |
Pump Type | Gear |
Relief Valve Pressure | 3000 psi |
Bucket Capacity | 1 cu yd (0 cu m) |
Bucket Width | 60 in (152 cm) |
Operating Load Rating | 1,300 lbs (590 kg) |
Operating Width | 60 in (152 cm) |
Tipping Angle | 2600 degrees |
Alternator Supplied Amperage | 120 amps |
Chain Box Fluid Capacity - each side | 2 gal (6 l) |
Engine Oil Fluid Capacity | 2 gal (8 l) |
Fuel Capacity | 16 gal (61 l) |
Hydraulic System Fluid Capacity | 4 gal (15 l) |
Operating Speed | 7 mph (11 kph) |
Operating Voltage | 12 volts |
Operational Weight | 5,000 lbs (2,268 kg) |
Tire Size | 10 x 16.5 |