Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
ENGINE POWER HP (KW) | 67 (50) Starting 2020 Model Year |
OPERATING LOAD LBS. (KG) | 1,750 (790) Starting 2016 Model Year |
OPERATING WIDTH IN. (CM) | 66.1 (167.89) Starting 2016 Model Year |
RATED OPERATING CAPACITY LBS. (KG) (50%) | 1,750 (790) Starting 2020 Model Year |
Clearance at Max Lift and Dump | 8 ft (2 m) |
Ground Clearance | 7 in (18 cm) |
Height - Top of Cab | 7 ft (2 m) |
Length w/o Bucket | 9 ft (3 m) |
Length with Bucket | 11 ft (3 m) |
Reach at Max Lift and Dump | 21 in (54 cm) |
Turning Radius from Center - inc bucket | 78 in (199 cm) |
Turning Radius from Center - machine rear | 63 in (160 cm) |
Wheelbase | 4 ft (1 m) |
Width Over Tires | 5 ft (2 m) |
Aspiration | Turbocharged |
Displacement | 135 cu in (2,212 cu cm) |
Engine Model | ISM N844T/M3 |
Gross Power | 57 hp (43 kw) |
Max Torque | 126 lbs ft (171 nm) |
Number of Cylinders | 4 |
Power Measured @ | 2900 rpm |
Torque Measured @ | 1800 rpm |
Pump Flow Capacity | 10 gpm (36 lpm) |
Pump Type | Gear |
Relief Valve Pressure | 3000 psi |
Bucket Capacity | 1 cu yd (0 cu m) |
Bucket Width | 66 in (168 cm) |
Operating Load Rating | 1,750 lbs (794 kg) |
Operating Width | 64 in (163 cm) |
Tipping Angle | 3500 degrees |
Alternator Supplied Amperage | 95 amps |
Chain Box Fluid Capacity - each side | 2 gal (7 l) |
Engine Oil Fluid Capacity | 2 gal (9 l) |
Fuel Capacity | 20 gal (76 l) |
Hydraulic System Fluid Capacity | 5 gal (20 l) |
Max Speed | 12 mph (19 kph) |
Operating Speed | 7 mph (12 kph) |
Operating Voltage | 12 volts |
Operational Weight | 6,200 lbs (2,812 kg) |
Tire Size | 10 x 16.5 |