- Category: Skid Steer Loaders ➔
- Manufacturer: Caterpillar ➔
- Model: 252 ➔
The Caterpillar 252 Skid Steer Loader is a versatile and powerful machine designed to tackle a variety of tasks on construction sites and other work environments. With a 59-horsepower engine, 2250-pound operating load rating, and breakout forces of up to 5020 pounds, this skid steer offers impressive performance capabilities. Equipped with a hydraulic system flow capacity of 22 gallons per minute and a 0.6 cubic yard bucket capacity, the Cat 252 ensures efficient operation and productivity. Additionally, its compact dimensions, comfortable cab with ROPS and FOPS protection, and a maximum speed of 7.6 mph make it a reliable and safe choice for any job.
General Specifications
Cab
FOPS | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
|
FOPS Level II | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
|
ROPS | SAE J1040 MAY94 and ISO3471:1994
|
Dimensions
Bucket Pin Height - Carry Position | 10 in (24 cm)
|
Bucket Pin Height - Maximum Lift | 11 ft (3 m)
|
Bumper Overhang - Rear Axle | 41 in (104 cm)
|
Clearance at Max Lift and Dump | 8 ft (2 m)
|
Clearance at Maximum Lift and Dump | 98 in (249 cm)
|
Ground Clearance | 9 in (23 cm)
|
Length - With Bucket on Ground | 142 in (362 cm)
|
Length - Without Bucket | 114 in (290 cm)
|
Length w/o Bucket | 10 ft (3 m)
|
Length with Bucket | 12 ft (4 m)
|
Maximum Overall Height | 161 in (409 cm)
|
Reach - Maximum Lift/Dump | 33 in (83 cm)
|
Reach at Max Lift and Dump | 31 in (78 cm)
|
Turning Radius from Center - inc bucket | 89 in (227 cm)
|
Vehicle Width over Tires | 72 in (183 cm)
|
Wheel Base | 4 ft (1 m)
|
Wheelbase | 4 ft (1 m)
|
Width Over Tires | 6 ft (2 m)
|
Engine
Bore | 4 in (10 cm)
|
Displacement | 183 cu in (2,999 cu cm)
|
Engine Make | Caterpillar
|
Engine Model | Cat 3034C
|
Gross Power | 59 hp (44 kw)
|
Net Flywheel Power | 59 hp (44 kw)
|
Number of Cylinders | 4
|
Power Measured @ | 2600 rpm
|
Stroke | 4 in (10 cm)
|
Hydraulic System
Hydraulic Flow | Standard flow
|
Loader Hydraulic Flow | 22 gpm (83 lpm)
|
Loader Hydraulic Pressure | 3300 psi
|
Pump Flow Capacity | 22 gpm (83 lpm)
|
Loader
Bucket Capacity | 1 cu yd (0 cu m)
|
Operating Load Rating | 2,250 lbs (1,021 kg)
|
Tipping Angle | 4733.3 degrees
|
Operating Specifications
Breakout Force - Lift Cylinder | 5,020 lbs (2,277 kg)
|
Breakout Force - Tilt Cylinder | 5,212 lbs (2,364 kg)
|
Fuel Capacity | 24 gal (90 l)
|
Hydraulic System Fluid Capacity | 14 gal (53 l)
|
Max Speed | 8 mph (12 kph)
|
Operating Speed | 8 mph (12 kph)
|
Operational Weight | 3,535 lbs (1,603 kg)
|
Rated Operating Capacity | 2,250 lbs (1,021 kg)
|
Rated Operating Capacity with Optional Counterweight | 2,300 lbs (1,043 kg)
|
Tipping Load | 4,500 lbs (2,041 kg)
|
Service Refill Capacities
Chain Box - Each Side | 2 gal (8 l)
|
Cooling System | 3 gal (10 l)
|
Engine Crankcase | 2 gal (7 l)
|
Fuel Tank | 24 gal (90 l)
|
Hydraulic System | 14 gal (53 l)
|
Hydraulic Tank | 9 gal (35 l)
|
Weights
Operating Weight | 7,615 lbs (3,454 kg)
|