Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 268B Skid Steer Loader is a versatile and powerful machine designed for a wide range of applications. With a turbocharged engine delivering up to 82 horsepower, this loader offers a high level of performance and efficiency. Equipped with a hydraulic system capable of delivering 33.02 gpm of flow and a loader breakout force of 5507.2 psi, the Caterpillar 268B ensures optimal productivity on the job site. With a rated operating capacity of 2700 lbs and a tipping load of 5613 lbs, this skid steer loader is a reliable and durable option for various construction and landscaping tasks.
FOPS | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
FOPS Level II | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
ROPS | SAE J1040 MAY94 and ISO3471:1994 |
Bucket Pin Height - Carry Position | 8 in (21 cm) |
Bucket Pin Height - Maximum Lift | 11 ft (3 m) |
Bucket Pin Reach - Maximum Lift | 14 in (35 cm) |
Bumper Overhang - Rear Axle | 41 in (104 cm) |
Clearance at Max Lift and Dump | 8 ft (2 m) |
Clearance at Maximum Lift and Dump | 95 in (241 cm) |
Ground Clearance | 8 in (20 cm) |
Length - With Bucket on Ground | 142 in (361 cm) |
Length - Without Bucket | 114 in (290 cm) |
Length w/o Bucket | 10 ft (3 m) |
Length with Bucket | 12 ft (4 m) |
Maximum Overall Height | 160 in (406 cm) |
Maximum Reach - With Arms Parallel | 52 in (132 cm) |
Reach - Maximum Lift/Dump | 33 in (84 cm) |
Reach at Max Lift and Dump | 33 in (83 cm) |
Turn Radius from Center - Bucket | 86 in (218 cm) |
Turn Radius from Center - Coupler | 52 in (132 cm) |
Turn Radius from Center - Rear | 67 in (170 cm) |
Turning Radius from Center - inc bucket | 86 in (218 cm) |
Turning Radius from Center - machine rear | 67 in (170 cm) |
Vehicle Width over Tires | 72 in (183 cm) |
Wheel Base | 4 ft (1 m) |
Wheelbase | 4 ft (1 m) |
Width Over Tires | 6 ft (2 m) |
Aspiration | turbocharged |
Bore | 4 in (9 cm) |
Engine Make | Caterpillar |
Engine Model | Cat 3044C DIT |
Engine Power - ISO 14396 | 80 hp (60 kw) |
Gross Power - SAE J1995 | 82 hp (61 kw) |
Net Flywheel Power | 76 hp (57 kw) |
Net Power - EEC 80/1269 | 77 hp (57 kw) |
Net Power - ISO 9249 EEC | 77 hp (57 kw) |
Net Power - SAE 1349 | 76 hp (57 kw) |
Stroke | 5 in (12 cm) |
Hydraulic Flow | High Flow XPS |
Hydraulic Power | 78 hp (58 kw) |
Loader Hydraulic Flow | 33 gpm (125 lpm) |
Loader Hydraulic Pressure | 4061.06 psi |
Maximum Loader Hydraulic Flow | 33 gpm (125 lpm) |
Maximum Loader Hydraulic Pressure | 4060 psi |
Pump Flow Capacity | 33 gpm (125 lpm) |
Relief Valve Pressure | 4061.1 psi |
Breakout Force | 5507.2 psi |
Operating Load Rating | 2,699 lbs (1,224 kg) |
Tipping Angle | 5399.2 degrees |
Alternator Supplied Amperage | 90 amps |
Breakout Force - Lift Cylinder | 5,192 lbs (2,355 kg) |
Breakout Force - Tilt Cylinder | 5,508 lbs (2,498 kg) |
Chain Box Fluid Capacity - each side | 2 gal (8 l) |
Cooling System Fluid Capacity | 3 gal (10 l) |
Engine Oil Fluid Capacity | 3 gal (10 l) |
Fuel Capacity | 24 gal (90 l) |
Hydraulic System Fluid Capacity | 14 gal (53 l) |
Max Speed | 7 mph (12 kph) |
Operating Voltage | 12 volts |
Operational Weight | 7,994 lbs (3,626 kg) |
Rated Operating Capacity | 2,700 lbs (1,225 kg) |
Rated Operating Capacity with Optional Counterweight | 2,750 lbs (1,247 kg) |
Tipping Load | 5,613 lbs (2,546 kg) |
Tire Size | 12x16.5 10PR |
Travel Speed Forward | 7 mph (12 kph) |
Travel Speed Forward - 2-Speed Option | 11 mph (18 kph) |
Travel Speed Reverse | 7 mph (12 kph) |
Travel Speed Reverse - 2-Speed Option | 11 mph (18 kph) |
Chain Box - Each Side | 2 gal (8 l) |
Cooling System | 3 gal (10 l) |
Engine Crankcase | 3 gal (10 l) |
Fuel Tank | 24 gal (90 l) |
Hydraulic System | 14 gal (53 l) |
Hydraulic Tank | 9 gal (35 l) |
Operating Weight | 7,995 lbs (3,626 kg) |