Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Maximum Axle Torque | 6,235 lbs ft (8,453 nm) |
Tractive Effort | 8,610 lbs ft (11,673 nm) |
Angle of departure | 31 degrees |
Ground Clearance | 12 in (30 cm) |
Height - Top of ROPS/FOPS | 85 in (215 cm) |
Hinge pin height, maximum height | 127 in (322 cm) |
Length | 142 in (360 cm) |
Length w/o Bucket | 10 ft (3 m) |
Reach at Max Lift and Dump | 31 in (80 cm) |
Turning Radius - TTS870 | 7 ft (2 m) |
Air cleaner | Dry dual element |
Aspiration | Turbocharged and intercooled |
Displacement | 183 cu in (3,000 cu cm) |
Emissions Certification | EPA Tier 3/EU Stage IIIA |
Engine Make | John Deere PowerTech |
Engine Model | E 5030HT |
Net Torque | 221 lbs ft (300 nm) |
Net Torque Rise | 43% |
Number of Cylinders | 5 |
Power Measured @ | 2800 rpm |
Torque Measured @ | 2000 rpm |
Hydraulic Horsepower-Standard Flow | 46 hp (34 kw) |
Hydraulic Horsepower_High Flow | 77 hp (57 kw) |
Pump Flow Capacity | 32 gpm (122 lpm) |
System Pressure at Couplers | 3450 psi |
Boom breakout force | 5,000 lbs (2,268 kg) |
bucket breakout force (ISO 14397) | 7,750 lbs (3,515 kg) |
Dump angle @ max. height | 45 degrees |
Dump height | 9 ft (3 m) |
Operating Load Rating | 2,950 lbs (1,338 kg) |
Operating Width | 77 in (196 cm) |
Rollback - Ground Level | 35 degrees |
Tipping load (ISO 14397) | 5,600 lbs (2,540 kg) |
Width without Bucket | 6 ft (2 m) |
Alternator Supplied Amperage | 70 amps |
Hydraulic System Fluid Capacity | 21 gal (80 l) |
Max Speed | 12 mph (19 kph) |
Operating Voltage | 12 volts |
Operational Weight | 8,409 lbs (3,814 kg) |
Tire Size | 14 x 17.5 12 PR Extra Wall |