Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Maximum Axle Torque | 6,830 lbs ft (9,260 nm) |
Tractive Effort | 9,300 lbs ft (12,609 nm) |
Angle of departure | 31 degrees |
Ground Clearance | 11 in (28 cm) |
Height - Top of ROPS/FOPS | 85 in (215 cm) |
Hinge pin height, maximum height | 127 in (323 cm) |
Length | 142 in (360 cm) |
Length w/o Bucket | 10 ft (3 m) |
Reach at Max Lift and Dump | 32 in (81 cm) |
Turning Radius - TTS870 | 7 ft (2 m) |
Wheelbase | 4 ft (1 m) |
Air cleaner | Dry dual element |
Aspiration | Turbocharged and intercooled |
Displacement | 183 cu in (3,000 cu cm) |
Emissions Certification | EPA Tier 3/EU Stage IIIA |
Engine Make | John Deere PowerTech |
Engine Model | E 5030HT |
Net Torque | 252 lbs ft (341 nm) |
Net Torque Rise | 36.9% |
Number of Cylinders | 5 |
Power Measured @ | 2400 rpm |
Torque Measured @ | 1950 rpm |
Hydraulic Horsepower-Standard Flow | 40 hp (30 kw) |
Hydraulic Horsepower_High Flow | 61 hp (45 kw) |
Pump Flow Capacity | 38 gpm (144 lpm) |
System Pressure at Couplers | 3450 psi |
Boom breakout force | 6,600 lbs (2,994 kg) |
bucket breakout force (ISO 14397) | 13,875 lbs (6,294 kg) |
Dump angle @ max. height | 45 degrees |
Operating Load Rating | 3,350 lbs (1,520 kg) |
Operating Width | 78 in (198 cm) |
Rollback - Ground Level | 35 degrees |
Tipping load (ISO 14397) | 6,400 lbs (2,903 kg) |
Width without Bucket | 7 ft (2 m) |
Alternator Supplied Amperage | 70 amps |
Hydraulic System Fluid Capacity | 25 gal (95 l) |
Max Speed | 12 mph (19 kph) |
Operating Voltage | 12 volts |
Operational Weight | 9,178 lbs (4,163 kg) |
Tire Size | 14 x 17.5 14 PR Hauler |