Categories ↠ Skid Steer Loaders ↠ John Deere 7775

John Deere 7775 Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: John Deere ➔
Model: 7775 ➔

General Specifications

Dimensions

Clearance at Max Lift and Dump	8 ft (2 m)
Ground Clearance	8 in (20 cm)
Height - Top of Cab	6 ft (2 m)
Length w/o Bucket	9 ft (3 m)
Length with Bucket	11 ft (3 m)
Reach at Max Lift and Dump	28 in (71 cm)
Turning Radius from Center - inc bucket	45 in (114 cm)
Turning Radius from Center - machine rear	45 in (114 cm)
Wheelbase	4 ft (1 m)

Engine

Displacement	134 cu in (2,188 cu cm)
Engine Model	Series 220
Number of Cylinders	4
Power Measured @	3000 rpm

Hydraulic System

Pump Flow Capacity	17 gpm (64 lpm)
Pump Type	Open-center
Relief Valve Pressure	2650 psi

Loader

Breakout Force	3712 psi
Bucket Capacity	1 cu yd (0 cu m)
Operating Load Rating	1,705 lbs (773 kg)
Tipping Angle	2000 degrees

Operating Specifications

Alternator Supplied Amperage	40 amps
Fuel Capacity	14 gal (55 l)
Max Speed	7 mph (12 kph)
Operating Speed	7 mph (12 kph)
Operating Voltage	12 volts
Operational Weight	5,405 lbs (2,452 kg)

John Deere 7775s currently for sale

A 2000 John Deere 7775 From Team Boone for $22,000.00 USD

A 1995 John Deere 7775 From Schmidt Equipment Inc. for $11,900.00 USD

A 1995 John Deere 7775 From United Construction & Forestry for $11,900.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon