Categories ↠ Smooth Drum Rollers ↠ Hamm DV PLUS 70i VT-S

Hamm DV PLUS 70i VT-S Smooth Drum Roller

Category: Smooth Drum Rollers ➔
Manufacturer: Hamm ➔
Model: DV PLUS 70i VT-S ➔

General Specifications

Dimensions

Ground Clearance	24 in (61 cm)
Height - Top of Cab	10 ft (3 m)
Maximum width	9,088 ft (2,770 m)
Overall Length	163 in (414 cm)
Overall Width	6 ft (2 m)
Turning Radius - Inside	9 ft (3 m)
Wheelbase	118 in (300 cm)

Drum

Centrifugal Force - High	15,287 lbs (6,934 kg)
Centrifugal Force - Low	15,062 lbs (6,832 kg)
Drum Diameter	45 in (114 cm)
Drum thickness	1 in (2 cm)
Drum Type	Smooth/divided
Drum Width	59 in (150 cm)
Nominal Amplitude - High	0 in (0 cm)
Nominal Amplitude - Low	0 in (0 cm)
Static Linear Load	146.8 lbs in
Vibration Frequency 1	42 vpm
Vibration Frequency 2	50 vpm

Engine

Emissions Certification	EPA Tier 4
Engine Make	KUBOTA
Engine Model	V3307-CR-T
Gross Power	100 hp (74 kw)
Net Power	100 hp (74 kw)
Number of Cylinders	4
Power Measured @	2200 rpm

Operating Specifications

Fuel Capacity	39 gal (148 l)
Operating Weight	22,664 lbs (10,280 kg)
Operating weight Cabin	16,744 lbs (7,595 kg)
Oscillating angle	4 degrees
Water Spray System Fluid Capacity	208 gal (788 l)

Speeds

Speed - working gear

7 mph (11 kph)

Tires

Number of tyres, rear	4
Size of tyres, rear	11.00-20
Width over tyres, rear	64 in (162 cm)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon