Case Ih 9180 Tractor

Category: Tractors ➔
Manufacturer: Case Ih ➔
Model: 9180 ➔

General Specifications

Dimensions

Ground Clearance	19 in (49 cm)
Height - Top of Cab	14 ft (4 m)
Overall Length	279 in (709 cm)
Wheelbase	12 ft (4 m)
Width Outside Frame	8 ft (2 m)

Engine

Aspiration	Turbocharged
Bore	6 in (14 cm)
Displacement	854 cu in (14,001 cu cm)
Engine Make	Cummins
Engine Model	NTA-855
Gross Power	375 hp (280 kw)
Number of Cylinders	6
Power Measured @	2100 rpm
PTO Power	340 hp (254 kw)
Stroke	6 in (15 cm)
Torque	1,131 lbs ft (1,533 nm)
Torque Measured @	1400 rpm

Hydraulic System

Hydraulic System Type	Closed center
Number of Remote Control Valves	3 tO 4
Pump Flow Capacity	40 gpm (151 lpm)
Relief Valve Pressure	2500 psi

Operating Specifications

3 Point Hitch Lift Capacity @ 24 inches	14,000 lbs (6,350 kg)
3 Point Hitch Type	IV
Cooling System Fluid Capacity	17 gal (63 l)
Engine Oil Capacity	10 gal (39 l)
Front Tire Size	24.5-32
Fuel Capacity	250 gal (946 l)
Hydraulic System Fluid Capacity	26 gal (98 l)
Operating Voltage	12 volts
Operating Weight	27,999 lbs (12,700 kg)
Rear Tire Size	24.5-32

Production

Series	9100 Series
Years Manufactured	1986 - 1990

Transmission

Max Speed - forward	17 mph (28 kph)
Max Speed - reverse	5 mph (8 kph)
Number of Forward Gears	12
Number of Reverse Gears	2
Transmission Type	Full power shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon