Categories ↠ Truck Cranes ↠ Link-Belt HTC-8660

Link-Belt HTC-8660 Truck Crane

Category: Truck Cranes ➔
Manufacturer: Link-Belt ➔
Model: HTC-8660 ➔

General Specifications

Boom

Height	110 ft (34 m)
Max Elevating Angle	78 degrees
Max Height @ Max Raise Angle - no jib	118 ft (36 m)
Max Working Radius	100 ft (30 m)
Min Height @ Max Raise Angle	43 ft (13 m)
Min Working Radius	7 ft (2 m)
Number of Sections	4
Swing Speed	2.5 rpm

CARRIER ENGINE

Displacement	763 cu in (12,503 cu cm)
Gross Power	365 hp (272 kw)
Make	Link-Belt
Max Torque	1,350 lbs ft (1,830 nm)
Power Measured @	1800 rpm
Torque Measured @	1200 rpm

Dimensions

Carrier Length	37 ft (11 m)
Ground Clearance	1 ft (0 m)
Transport Height	12 ft (4 m)
Transport Length	44 ft (13 m)
Transport Width	9 ft (3 m)
Upper Structure Tail Swing Radius	13 ft (4 m)
Width w/ Outriggers Extended	21 ft (6 m)

Operating Specifications

Alternator Supplied Amperage	135 amps
Carrier Fuel Capacity	75 gal (284 l)
Carrier Hydraulic System Fluid Capacity	144 gal (545 l)
Carrier Oil Capacity	11 gal (40 l)
Number of Axels	4
Operating Voltage	12 volts
Operating Weight	65,605 lbs (29,758 kg)
Tire Size	front 425/64R22.5 rear 11R22.5

Transmission

Max Speed - Forward	61 mph (98 kph)
Max Speed - Reverse	5 mph (9 kph)
Number of Forward Gears	12
Number of Reverse Gears	2
Transmission Type	manual transmission

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon